I did a search and did not find anything so I figured I'd ask.
I removed my 64.5 parking brake handle and installed a new repop handle from NPD. Once on I stuck the rod/handle assembly back into the bracket and found out the handle seemed to be upside down. I looked online at some pictures and played with my assembly a bit and figured out the handle (if flipped around 180 degrees) would be pointing up at the dash when installed. I dug my old handle from the trash bin and the hole for the pin that locks it to the shaft is in a completely different location.
Is there a reproduction handle that will smack right on the 64.5 or am I looking at getting a 65/66 regular (like I have) and redrilling it?
