ConcoursMustang Forums
Restoring - General discussions that span across many different groups of years and models => Drivetrain => Topic started by: 266ks on March 09, 2014, 02:11:43 PM
-
What is the best way to install the plastic fan onto the smog pump splines? It looks like it could be easily broken. Thanks for any help
-
Center it on the center shaft and line up the bolt hoses. Place the pulley on the pump then tighten the bolts down slowly (using a cross pattern to do so) until the fan is seated.
That is what has worked for me ;)
BTW for others viewing this post
A site member has been working on an article for the Library here on rebuilding the Thermactor pumps and we're in final review :)
-
Thanks Jeff, I had thought that might work but wanted advice before I did.