ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1964 1/2 - 1965 => Topic started by: ChrisV289 on February 11, 2018, 09:23:10 AM
-
So got a new set of transmission pan bolts from amk that have little anchors on them. I removed my old bolts and 8 out of the 11 had the WB on them. The other three were different; 2 had the D and one the E. Are the WB head markings original to the trans pan and where are the other 3 supposed to be?
-
So got a new set of transmission pan bolts from amk that have little anchors on them. I removed my old bolts and 8 out of the 11 had the WB on them. The other three were different; 2 had the D and one the E. Are the WB head markings original to the trans pan and where are the other 3 supposed to be?
WB is a very common makers mark that I have found on transmission pans over the years .
-
Not unusual IMHO to find a couple of different head markings on the pan bolts
Here is a look at some of them from that car we've been using as a help for your restoration
Hope this helps
You can make out one of the WB style while most of the others are not
(http://www.concoursmustang.com/forum/gallery/9/6-110218135546.jpeg)
Looks like an E in this example
(http://www.concoursmustang.com/forum/gallery/9/6-110218135601.jpeg)
-
Thanks Jeff and Bob. I guess I'll clean them up and eventually put them back on the car.