Restoring - General discussions that span across many different groups of years and models > Interior & Trunk

quarter window regulators

(1/2) > >>

Sunlitgold68:

Is there a part # on the quarter window regulators? Are 68 regulators different from 67's? Thanks

gtamustang:
67 and 68 quarter window regulators are interchangeable. I have not seen a part number on the regulators.

Regards,
Pete Morgan

Sunlitgold68:
Can window regulators be "tightened" up? My window would drop an inch or 2 from driving around ect. Use to pull up one window by hand while cranking it. Not sure if this was from lack of grease or wore out rollers or wore out regulators.

gtamustang:
Not really. It sounds like the gear drive mechanism is wearing out for your. There are "adjustments" that can be made to correct most window movement issues...track and guide cleaning, track alignment, stop adjustment, etc.

Regards,
Pete Morgan

Sunlitgold68:
Are rollers normally replaced? If so are the reproductions any good? Thanks

Navigation

[0] Message Index

[#] Next page