Restoring - General discussions that span across many different groups of years and models > Body, Paint & Sealers

how can i fasten the windsheild moulding clips

(1/2) > >>

joe747:
lots of those studs are missing what is everyone useing to fasten the clips with

svo2scj:
 You can do what they did at the factory (when missing or broken)
Grind the head off a pan head phillips, paint black and install or use these.....


http://www.glasswarepro.com/2196430-item-C_R__LAURENCE-CP774446---+CRL+4+X.aspx?sgd=344d330d314d312d312d312

Mark

joe747:
any one  have a pic of this from the factory

svo2scj:
Do you mean a photo of line workers installing screws?    Cause that I don't have.


I have photos (that if you can open with magnifying software) of my 56K mile car on disassembly  and after media blasting that you can see the screws.   In my case the entire driver side roof/A piller got them.

It is going to take getting a network connection and transfer to Photobucket - so let me know if you can use FAX VIEWER etc to blow up.

Mark

joe747:
can you take a pic and download on this site
thanks for the input

Navigation

[0] Message Index

[#] Next page