ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Mustang => Topic started by: Cool Times on March 24, 2017, 06:04:59 PM

Title: What pulleys? 67 289 4V
Post by: Cool Times on March 24, 2017, 06:04:59 PM

Good morning:

I need your help since my research has left me confused.  Have a 1967 289 4V mustang with PS, with MT, with TE, with std cooling and no AC built in May 1967.  For the water pump pulley, do I need C6OE-8509-A or C7OE-8509-B.  For the crank pulley, do I need C7OE-6312-A or C6OE-6312-A.  For the power steering pulley, do I need 7AE or AC? For the smog pump, I have C7ZE-9B447-A who I believe is correct.  Any guidance is appreciated.  Thank you.

Title: Re: What pulleys? 67 289 4V
Post by: BKnapp on March 24, 2017, 06:20:42 PM

Here is a great resource for the water pump and crank. Others will chime in on the smog and p/s. I hope it helps.

http://www.concoursmustang.com/forum/index.php?topic=13209.0 (http://www.concoursmustang.com/forum/index.php?topic=13209.0)

Title: Re: What pulleys? 67 289 4V
Post by: Cool Times on March 24, 2017, 06:40:59 PM

Thank you Bill.  Very helpful. 
Mike

Title: Re: What pulleys? 67 289 4V
Post by: rocnhrse on March 24, 2017, 09:59:15 PM

Mustang  Tek has a good Web page with pictures  and part numbers  ,good luck the fun is in the hunt for parts

Title: Re: What pulleys? 67 289 4V
Post by: 67gta289 on March 25, 2017, 07:57:02 AM

Mannel has relevant information in the copyrighted and published Mustang & Ford small block V8 manual, ISBN 099627410-3.

Appendix B, page B-12 says that water pump pulley C6OE-8509-A is correct for your application.

As for the crankshaft and power steering pulleys...if I had the answer on my own I would provide it.  But since I'm pulling from someone else's work I think it best that you buy the book.

Hope you understand my dilemma.

Title: Re: What pulleys? 67 289 4V
Post by: Cool Times on March 25, 2017, 10:30:29 AM

Thank you John and Rocnhrse.   I've looked at MustangTek which gets me narrowed down, so will buy the book as suggested.
Mike

Title: Re: What pulleys? 67 289 4V
Post by: 196667Bob on March 27, 2017, 06:18:06 PM

Mike : Speaking from "the voice of experience", go directly to Mannel's site to purchase the book; do not pass 'GO', and don't over pay for the book. I think you will find that he has the best price available. Unfortunately, I didn't have this advice when I purchased mine, and paid way too much.

Bob

Title: Re: What pulleys? 67 289 4V
Post by: midlife on March 27, 2017, 06:57:35 PM

Quote from: 196667Bob on March 27, 2017, 06:18:06 PM

Mike : Speaking from "the voice of experience", go directly to Mannel's site to purchase the book; do not pass 'GO', and don't over pay for the book. I think you will find that he has the best price available. Unfortunately, I didn't have this advice when I purchased mine, and paid way too much.

Bob

Nevertheless, Bob, you'll certainly agree that the book is priceless!

Title: Re: What pulleys? 67 289 4V
Post by: 196667Bob on March 27, 2017, 11:43:46 PM

++++++1

Title: Re: What pulleys? 67 289 4V
Post by: markb0729 on March 28, 2017, 10:22:40 AM

Indispensable! 

Title: Re: What pulleys? 67 289 4V
Post by: Cool Times on March 29, 2017, 06:37:50 PM

You're correct.  His site is the cheapest.  Thank you.

Title: Re: What pulleys? 67 289 4V
Post by: midlife on March 29, 2017, 06:52:54 PM

That's because he doesn't have to pay royalties to himself!  *G*