ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Mustang => Topic started by: 67gtasanjose on July 26, 2022, 04:07:32 PM

Title: 67 Spare Tire & Jack Storage "MARK" on Jack
Post by: 67gtasanjose on July 26, 2022, 04:07:32 PM

See attaching image of Jack Storage Decal, it mentions: "1. OPEN JACK ASSEMBLY UNTIL MARK IS VISIBLE ON INNER LINK AND LAY FLAT ON FLOOR WITH BASE AGAINST TAPERED WALL"

Where's the "MARK"?

Title: Re: 67 Spare Tire & Jack Storage "MARK" on Jack
Post by: 67gtasanjose on July 26, 2022, 09:22:20 PM

This is what I am refering to:

Title: Re: 67 Spare Tire & Jack Storage "MARK" on Jack
Post by: Bob Gaines on July 26, 2022, 10:18:10 PM

Thanks for pointing that out. I still am unclear as far why the need for the mark mention in the illustration given the other directions .  Even if you disregard the written copy as long as it is stowed the same way as illustrated you should be fine . FYI most typically the lug wrench head ,and at least a portion of the shaft along with the two steel zinc plated washers were unpainted and the nylon washer sandwiched between was unpainted also .