ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1966 Shelby => Topic started by: Brant on September 16, 2011, 09:33:31 AM

Title: UPDATE 9/22/16 Restoration Updates - 6S033
Post by: Brant on September 16, 2011, 09:33:31 AM
We have started the restoration of 6S033 and should have rather regular updates on our Blog with a lot of pictures.  I'll post here when I post a new update.  The car is now on the rotisserie and has been stripped.  Check on more here 

http://blog.virginiaclassicmustang.com/2011/09/1966-gt350-shelby-mustang-restoration.html

(https://lh3.googleusercontent.com/--8wQe_nacHk/TnJJbuZaiRI/AAAAAAAAc7s/ALjXFkLv1BE/s400/IMG_1748.JPG)
Title: Re: Restoration Updates - 6S033
Post by: Brant on September 19, 2011, 10:51:19 AM
I just made another post with more pictures to our Blog on the progress of 6S033.

(https://lh5.googleusercontent.com/-qbmd6gnDiRo/TnOjsIpxWrI/AAAAAAAAdBc/awEnhtH_nWk/s400/IMG_1766.JPG)


http://blog.virginiaclassicmustang.com/2011/09/1966-gt350-shelby-mustang-restoration_19.html
Title: Re: Restoration Updates - 6S033
Post by: J_Speegle on September 19, 2011, 05:00:59 PM
Brant - what panel is the one date (I believe this is the latest sheet metal date stamp on 6S033.  It is June 21, 1965.) on?

Thanks - just adding to my tracking ;)
Title: Re: Restoration Updates - 6S033
Post by: Brant on September 19, 2011, 07:34:29 PM
Brant - what panel is the one date (I believe this is the latest sheet metal date stamp on 6S033.  It is June 21, 1965.) on?

Thanks - just adding to my tracking ;)

Jeff,

That latest date of 6 21 is on the LH Front Fender Apron. 

There is a 6 20 stamping on one of the inner rear wheel housings, but that 6 21 is the latest date that I saw on any of the sheet metal.  Oh, by the way, one of the hood hinges has a 6 21 date too.
Title: Re: Restoration Updates - 6S033
Post by: CharlesTurner on September 20, 2011, 01:00:21 PM
On the front lip of the where the upper and lower cowl come together in the engine bay is usually a date stamp in the middle.  It would normally get covered by the self-leveling sealer.  I've found that date to be one of the latest sheet metal dates on other cars I've restored.
Title: Re: Restoration Updates - 6S033
Post by: Brant on September 20, 2011, 01:51:32 PM
On the front lip of the where the upper and lower cowl come together in the engine bay is usually a date stamp in the middle.  It would normally get covered by the self-leveling sealer.  I've found that date to be one of the latest sheet metal dates on other cars I've restored.
Thanks, Charles.  I'll have to check this area.  As long as it is not covered by the export brace reinforcement piece that is welded in that middle area.
Title: Re: Restoration Updates - 6S033
Post by: CharlesTurner on September 20, 2011, 03:46:48 PM
Didn't think about the export brace reinforcement.  I'm guessing it would obscure the area.
Title: Re: Restoration Updates - 6S033
Post by: Brant on September 23, 2011, 09:57:20 AM
I just made another post with quite a few detailed images of 6S033.

http://blog.virginiaclassicmustang.com/2011/09/1966-gt350-shelby-mustang-restoration_23.html


(https://lh6.googleusercontent.com/-IWKJ8D3BE_A/TnSgDTyUElI/AAAAAAAAdGU/QiMPAfcERa8/s400/IMG_1661a.JPG)

(https://lh6.googleusercontent.com/-p-QsMzQATFs/TnSh967KoDI/AAAAAAAAdGg/XNODzJ7GbnI/s400/IMG_5037a.JPG)
Title: Re: Restoration Updates - 6S033
Post by: J_Speegle on September 23, 2011, 02:13:04 PM
Thanks Brand - you appear to be finding what we would expect on that period of San Jose cars.

As usual might be missing a few numbers from the frame area for the fenders (typical)

Did you find the writting on the front cross member or the taillight panel? To name a couple of locations
Title: Re: Restoration Updates - 6S033
Post by: Brant on September 23, 2011, 03:26:36 PM
Thanks Brant - you appear to be finding what we would expect on that period of San Jose cars.

As usual might be missing a few numbers from the frame area for the fenders (typical)

Did you find the writting on the front cross member or the taillight panel? To name a couple of locations

Jeff,

That's about it on the markings on the body.  I did not find anything on the tail light panel area.  Here is the radiator support.  It is like most I have seen.

(https://lh4.googleusercontent.com/-kksuoZdtLJw/TnzOOv7hy4I/AAAAAAAAdf0/5IQHhzMo1hM/s400/IMG_2285a.JPG)
Title: Re: Restoration Updates - 6S033
Post by: J_Speegle on September 23, 2011, 07:50:55 PM
Jeff,

That's about it on the markings on the body.  I did not find anything on the tail light panel area.  Here is the radiator support.  It is like most I have seen.


Multiple K's are typical in my experiences, along with often a single "D"  though the person marking this car (normally one of three) might be the one that placed the D higher - possibly didn't like bending over as much ;)
Title: Re: Restoration Updates - 6S033
Post by: Brant on September 30, 2011, 09:44:23 AM
I just made another post on our Blog with some more geeky detail pictures of the restoration of 6S033.

http://blog.virginiaclassicmustang.com/2011/09/1966-gt350-shelby-mustang-restoration_30.html

(https://lh4.googleusercontent.com/-MpApHkZxZCs/TnTEgoQlG2I/AAAAAAAAdJo/Xwq2375vaAA/s400/IMG_1845.JPG)
Title: Re: Restoration Updates - 6S033
Post by: CharlesTurner on September 30, 2011, 10:03:12 AM
Thanks for the pics.  Looks like a little rust pitting on the bottom to contend with, but looking really nice.
Title: Re: Restoration Updates - 6S033
Post by: Brant on September 30, 2011, 10:30:45 AM
Thanks for the pics.  Looks like a little rust pitting on the bottom to contend with, but looking really nice.
Thanks and yes, that pitting/surface rust stuff came from the previous owner storing the car on more or less a dirt floor for many years.
Title: Re: Restoration Updates - 6S033
Post by: rodster on October 11, 2011, 12:36:02 AM
I just made another post with quite a few detailed images of 6S033.

http://blog.virginiaclassicmustang.com/2011/09/1966-gt350-shelby-mustang-restoration_23.html


Brant,

I'm enjoying following this one too!  I like the "X" you pointed out (This "X" shows where a factory spot weld was supposed to be applied, but was missed.)  Don't remember seeing that too much before but now I found two on my 67!

Rod
Title: Re: Restoration Updates - 6S033
Post by: Brant on April 01, 2013, 11:01:35 AM
(https://lh3.googleusercontent.com/-yQjGUIkw4Io/UVcS9tpxKII/AAAAAAAA0wg/6h149baU17k/s640/IMG_8851.JPG) (http://blog.virginiaclassicmustang.com/2013/04/just-details1966-shelby-restoration.html)

Sorry...it's been a while....click on the picture above to check out my latest Blog post (http://blog.virginiaclassicmustang.com/2013/04/just-details1966-shelby-restoration.html) about the restoration of '66 Shelby Mustang 6S033.  The car is now in epoxy primer.  There are many more pictures on the Blog post. (http://blog.virginiaclassicmustang.com/2013/04/just-details1966-shelby-restoration.html)
Title: Re: Restoration Updates - 6S033
Post by: slipkid on April 01, 2013, 10:06:25 PM
Noticed in your earlier pics that the sheet metal reinforcing plates for the dual exhaust hangers have a sawtooth edge. I've never seen on other 5 ad 6 cars (have seen maybe a dozen).  Is it particular to a manufacturing plant?
Title: Re: Restoration Updates - 6S033
Post by: Brant on April 02, 2013, 01:33:16 PM
Noticed in your earlier pics that the sheet metal reinforcing plates for the dual exhaust hangers have a sawtooth edge. I've never seen on other 5 ad 6 cars (have seen maybe a dozen).  Is it particular to a manufacturing plant?

These?...not sure, they don't have sawtooth edges.  Maybe you saw a picture of something else or another car?

(https://lh4.googleusercontent.com/-bHTdAnRGDfQ/UVsHtrkWEJI/AAAAAAAA1Dc/ASxHPvUMCF8/s640/IMG_4465a.JPG)
Title: Re: Restoration Updates - 6S033
Post by: slipkid on April 02, 2013, 07:47:27 PM
Yes, those. I saved the pic of them on your first post.  Then enlarged it and saw the sawtooth.  It must be the pixel count showing a distortion on the enlargement.
Title: Re: Restoration Updates - 6S033
Post by: Brant on April 03, 2013, 10:05:23 AM
I just posted some more pictures of our '66 GT350 restoration.  Click on the link or either picture to see more.

(https://lh6.googleusercontent.com/-qU7G56pd-vU/UVcTSbSNEoI/AAAAAAAA00g/jfS-yh0IlrY/s640/IMG_4460.JPG) (http://blog.virginiaclassicmustang.com/2013/04/just-details1966-shelby-restoration_3.html)

(https://lh5.googleusercontent.com/-s7aFrT5YEY4/UVcTjvVbkRI/AAAAAAAA03Y/JT9KRL3SIx8/s640/IMG_4483.JPG) (http://blog.virginiaclassicmustang.com/2013/04/just-details1966-shelby-restoration_3.html)

http://blog.virginiaclassicmustang.com/2013/04/just-details1966-shelby-restoration_3.html
Title: Re: Restoration Updates - 6S033
Post by: CharlesTurner on April 03, 2013, 11:48:55 AM
Guessing this is just the first coat of primer on bare metal?  Looks like a great shell to work with.  Lots of little putty work for Jeremy!   ;D

Thanks for sharing.
Title: Re: Restoration Updates - 6S033
Post by: Brant on April 03, 2013, 12:42:32 PM
Guessing this is just the first coat of primer on bare metal?  Looks like a great shell to work with.  Lots of little putty work for Jeremy!   ;D

Thanks for sharing.

That's correct, Charles.  And, yes, lots more work to do for Jeremy!
Title: Re: Restoration Updates - 6S033
Post by: Brant on April 05, 2013, 10:17:02 AM
I have some more photos posted of the restoration on 6S033.  Click on the picture or the link to see more (http://blog.virginiaclassicmustang.com/2013/04/just-details1966-shelby-restoration_5.html).

(https://lh5.googleusercontent.com/-tT9w9AEzFJc/UVcTFj4ro5I/AAAAAAAA0yY/sS0i_YSHfi8/s640/IMG_4442.JPG) (http://blog.virginiaclassicmustang.com/2013/04/just-details1966-shelby-restoration_5.html)

(https://lh6.googleusercontent.com/-EpAx5TbfB6Y/UVcT9Uc9-0I/AAAAAAAA09w/fbp8Q0fH8LI/s640/IMG_4535.JPG) (http://blog.virginiaclassicmustang.com/2013/04/just-details1966-shelby-restoration_5.html)

http://blog.virginiaclassicmustang.com/2013/04/just-details1966-shelby-restoration_5.html
Title: Re: Restoration Updates - 6S033
Post by: cobrajetchris on April 05, 2013, 01:15:39 PM
Must be nice to be able to work with such a solid accident free car that is almost 50 years old. I had a 66 Shelby I bought 15 years ago and it was wrecked hard in the front and not repaired correctly along with the typical Midwest rust out to the sheet metal.  this must have been a very well taken care of car in a arid climate. A  car this solid gives you a big advantage of not having to deal with junk TIAWAN sheet metal. This will be a very nice car.
Title: Re: Restoration Updates - 6S033
Post by: Brant on June 05, 2013, 10:30:35 AM
Here are the latest photos of 6S033.  Click on the link or either photo to see more images.

(https://lh5.googleusercontent.com/-KPwruMMbHyA/Ua0JNuy1roI/AAAAAAAA3A4/R4BgchC5Ins/s640/IMG_4812.JPG) (http://blog.virginiaclassicmustang.com/2013/06/just-details1966-shelby-restoration.html)

(https://lh4.googleusercontent.com/-OSO_3tRl-Ug/Ua0I-y_HXiI/AAAAAAAA2-g/qTZqnlzmcb8/s640/IMG_4769.JPG) (http://blog.virginiaclassicmustang.com/2013/06/just-details1966-shelby-restoration.html)

http://blog.virginiaclassicmustang.com/2013/06/just-details1966-shelby-restoration.html
Title: Re: Restoration Updates - 6S033
Post by: Brant on June 19, 2013, 06:45:11 PM
The drips are on the floor pan now and the underside is pretty much completed.  Time to come down from the rotisserie for a bit.  Click here (http://blog.virginiaclassicmustang.com/2013/06/just-details1966-shelby-gt350-mustang.html) for more pictures or click on the picture itself.

(https://lh3.googleusercontent.com/-wQkavWeC20o/UcIVwlcWwMI/AAAAAAAA3To/bb56G8laMXY/s640/IMG_9664.JPG) (http://blog.virginiaclassicmustang.com/2013/06/just-details1966-shelby-gt350-mustang.html)
Title: Re: Restoration Updates - 6S033
Post by: drummingrocks on June 19, 2013, 09:54:18 PM
Brant, how did you duplicate the drips in the primer on the undercarriage?  It looks spot-on!
Title: Re: Restoration Updates - 6S033
Post by: carlite65 on June 19, 2013, 09:58:44 PM
they used thinned epoxy primer. it tells how in one of the captions.
Title: Re: Restoration Updates - 6S033
Post by: drummingrocks on June 20, 2013, 10:08:47 AM
they used thinned epoxy primer. it tells how in one of the captions.

Thanks, I looked at the site several times but I must've missed the caption.
Title: Re: Restoration Updates - 6S033
Post by: Brant on August 01, 2014, 12:02:30 PM
It's been a while, but here are pictures and a new post (http://blog.virginiaclassicmustang.com/2014/08/just-details1966-shelby-mustang-gt350.html) about the restoration of 6S033.

Click on the picture for more.

(https://lh5.googleusercontent.com/-lDdLfs-Tze0/U9pnh_Bfm0I/AAAAAAABJ4s/HMHCxWlT8wg/s640/IMG_3095.JPG) (http://blog.virginiaclassicmustang.com/2014/08/just-details1966-shelby-mustang-gt350.html)
Title: Re: Restoration Updates - 6S033
Post by: Brant on August 31, 2015, 12:25:30 PM
Here's my latest pictures of the restoration of 6S033.

Please click on the links below for lots more pictures:

Hood Restoration - Part 1 (http://blog.virginiaclassicmustang.com/2015/07/just-detailsrestoration-update-1966.html)

Hood Restoration - Part 2 (http://blog.virginiaclassicmustang.com/2015/08/just-detailshood-restoration-on-66.html)

(https://lh3.googleusercontent.com/-g5gMqbTb8jo/VcUkbSR2muI/AAAAAAABVv8/THWKgFF12QU/s600-Ic42/IMG_8536.JPG)
Title: Re: Restoration Updates - 6S033
Post by: J_Speegle on August 31, 2015, 02:12:31 PM
Looks like allot of work - but a heck of a job

Thanks for sharing
Title: Re: Restoration Updates - 6S033
Post by: Brant on November 09, 2015, 06:09:42 PM
It's been quite a while since I have posted an update on the restoration of 6S033, but it's getting close to paint!

Click here (http://blog.virginiaclassicmustang.com/2015/11/just-details1966-gt350-shelby-carryover.html) or on the picture for more.

(https://lh3.googleusercontent.com/-BsrZsoX1kI4/VkEXFUB0rVI/AAAAAAABaZE/tASMpIhnoFA/s640-Ic42/IMG_1096.JPG) (http://blog.virginiaclassicmustang.com/2015/11/just-details1966-gt350-shelby-carryover.html)
Title: Re: Restoration Updates - 6S033
Post by: Brant on December 04, 2015, 11:13:59 AM
6S033 starts getting some paint!  Lots more pictures at this link:

http://blog.virginiaclassicmustang.com/2015/12/just-details1966-gt350-shelby-carryover.html

or

just click on the picture below:

(https://lh3.googleusercontent.com/-dLBEGf7v2ro/VlYlEZPgzWI/AAAAAAABcI0/-PPzxEGmeZM/s640-Ic42/IMG_9322.JPG) (http://blog.virginiaclassicmustang.com/2015/12/just-details1966-gt350-shelby-carryover.html)
Title: Re: Restoration Updates - 6S033
Post by: Brant on December 16, 2015, 09:28:13 AM
The underside and engine compartment of 6S033 are painted!  Click here (http://blog.virginiaclassicmustang.com/2015/12/just-details1966-gt350-shelby-carryover_16.html) or on the picture below for more pictures.

(https://lh3.googleusercontent.com/-BlBFSRt1IcA/Vmnl-gUGP_I/AAAAAAABdPc/k-KjR-DDebw/s640-Ic42/DSC_0394.JPG) (http://blog.virginiaclassicmustang.com/2015/12/just-details1966-gt350-shelby-carryover_16.html)
Title: Re: Restoration Updates - 6S033
Post by: CharlesTurner on December 16, 2015, 10:42:20 AM
Very nice!
Title: Re: Restoration Updates - 6S033
Post by: 67gtasanjose on December 16, 2015, 01:34:34 PM
Not too far behind this scene, I still need about a minimum 10-20 hours (probably more like 50-100) metal work/prep-time to get remotely close....but pictures give incentive!
Title: Re: Restoration Updates - 6S033
Post by: ChrisV289 on December 16, 2015, 04:18:59 PM
I noticed you had the front bumper brackets installed when you priming and painting the car.  Did you find evidence of red primer under the front bumper brackets or were they just there to hold the car on the rotiserre
Title: Re: Restoration Updates - 6S033
Post by: Brant on December 16, 2015, 06:25:10 PM
I noticed you had the front bumper brackets installed when you priming and painting the car.  Did you find evidence of red primer under the front bumper brackets or were they just there to hold the car on the rotiserre

They are there to hold the car on the rotisserie.
Title: Re: Restoration Updates - 6S033
Post by: DKutz on December 16, 2015, 08:19:34 PM
I asked this in other locations, but why is the car not painted in the order the factory painted?  Primer, first then top coat.  Why do the undercarriage last and mask off the whole car?
Title: Re: Restoration Updates - 6S033
Post by: 1969 Cale II on December 17, 2015, 12:48:43 AM
All 3 of my Cyclones (68 and 2 69) Have the same color brown(taupe) on the floor as your car. I custom mixed a color to match. What did you use ?
Title: Re: Restoration Updates - 6S033
Post by: Brant on December 18, 2015, 10:31:43 AM
I asked this in other locations, but why is the car not painted in the order the factory painted?  Primer, first then top coat.  Why do the undercarriage last and mask off the whole car?

There are lots of different procedures and mountings on the actual assembly line painting. The goal is to duplicate the original look. Tons of thought was put into that to make it happen. BTW, in the pictures above, the outside body is not even painted yet. More pictures very soon.
Title: Re: Restoration Updates - 6S033
Post by: Brant on December 18, 2015, 10:32:25 AM
All 3 of my Cyclones (68 and 2 69) Have the same color brown(taupe) on the floor as your car. I custom mixed a color to match. What did you use ?

All colors were custom matched to what was originally found on the car.
Title: Re: Restoration Updates - 6S033
Post by: Brant on December 20, 2015, 02:42:14 PM
I just posted another update with more pictures.  This update shows the painting process of the interior area and trunk area.  Click here (http://blog.virginiaclassicmustang.com/2015/12/just-details1966-gt350-shelby-carryover_20.html) or on the picture below for lots more pictures.

(https://lh3.googleusercontent.com/-R3MUtKCOOyk/VnWL3av2tRI/AAAAAAABd1I/49_YZmYSDPs/s640-Ic42/IMG_1259.JPG) (http://blog.virginiaclassicmustang.com/2015/12/just-details1966-gt350-shelby-carryover_20.html)
Title: Re: UPDATE 1/29/16 Restoration Updates - 6S033
Post by: Brant on January 29, 2016, 07:00:37 PM
More pictures. It's painted!!

Click on the link or the picture.

http://blog.virginiaclassicmustang.com/2016/01/just-details1966-gt350-shelby-carryover.html

(https://lh3.googleusercontent.com/-GzL77VTlkXc/VqaWRyCfI9I/AAAAAAABeRg/Td0OrE2EeWw/s640-Ic42/DSC_0114.JPG) (http://blog.virginiaclassicmustang.com/2016/01/just-details1966-gt350-shelby-carryover.html)
Title: Re: UPDATE 1/29/16 Restoration Updates - 6S033
Post by: Richard P. on February 02, 2016, 09:03:28 AM
Brant

The car looks mighty fine. You and Jeremy do great work.
Title: Re: UPDATE 2/12/16 Restoration Updates - 6S033
Post by: Brant on February 12, 2016, 05:17:10 PM
We have another update. It's always excited when parts can start going on the car!

Click on the picture or link for more pictures.

http://blog.virginiaclassicmustang.com/2016/02/just-details1966-gt350-shelby-carryover.html

(https://lh3.googleusercontent.com/-n_aCAGnQ9ms/Vr5Ah57JtMI/AAAAAAABerg/JwHVRBzeUAs/s640-Ic42/DSC_0195.JPG) (http://blog.virginiaclassicmustang.com/2016/02/just-details1966-gt350-shelby-carryover.html)
Title: Re: UPDATE 2/12/16 Restoration Updates - 6S033
Post by: DKutz on February 13, 2016, 12:11:43 AM
What is the build date on this sj fastback?
Title: Re: UPDATE 2/12/16 Restoration Updates - 6S033
Post by: Brant on February 13, 2016, 04:09:29 PM
What is the build date on this sj fastback?
Probably early July '65.
Title: Re: UPDATE 2/12/16 Restoration Updates - 6S033
Post by: 1967 eight barrel on February 15, 2016, 12:43:56 PM
Holy cow! Looking at the quarter window sheet metal work makes my '67 500 tail lamp cut outs look clean in comparison.

                                                                                                     -Keith
Title: Re: UPDATE 2/12/16 Restoration Updates - 6S033
Post by: Brant on May 20, 2016, 05:57:43 PM
We finally have another update with a bunch more pictures. It's rolling on its own wheels!

Click on the link or one of the pictures for lots more pictures.

http://blog.virginiaclassicmustang.com/2016/05/just-details1966-gt350-shelby-carryover.html

(https://lh3.googleusercontent.com/-4MfMi3T9om0/VznSZ6qu1AI/AAAAAAABkN4/EttGOwoxNqQAVzePVg_vI8ez4qn8RnXzACCo/s640/IMG_2528.JPG) (http://blog.virginiaclassicmustang.com/2016/05/just-details1966-gt350-shelby-carryover.html)

(https://lh3.googleusercontent.com/-hjypB1Ti8IU/VznSW5O1-XI/AAAAAAABkKM/9qqCLB6SgIoa3cXpPZE7XNYItg1kvsRvQCCo/s400/IMG_2518.JPG) (http://blog.virginiaclassicmustang.com/2016/05/just-details1966-gt350-shelby-carryover.html)
Title: Re: UPDATE 2/12/16 Restoration Updates - 6S033
Post by: jwc66k on May 20, 2016, 07:25:12 PM
Cool. A bit off topic, what have you done to Charlie's 64 1/2 day 1 HP red coupe?
Jim
Title: Re: UPDATE 2/12/16 Restoration Updates - 6S033
Post by: Brant on May 20, 2016, 08:20:52 PM
Cool. A bit off topic, what have you done to Charlie's 64 1/2 day 1 HP red coupe?
Jim

Just some clean up, installed original steel wheels & hubcaps, and driven it! 

(https://lh3.googleusercontent.com/8sYFXhfsR4TN-XEczJI_ru8re_DtTmSK0CONqaIo3p2pwoTVtnAGwUUfFBfEmB_2FUz4JdspjQKTwd-qCRWwgPS5-XyYGcmyJj4b_PgNwilZHuTrnPu4Qcz80xqdzC-G4UNk2dTKeOCwWE9Ky73KxjJO70-twP0oRanAEhV-FTRVDhN13CKTwTXuKvCs8BXYQYE2sLC4HY1VJYpmp-Ejus2ifrs4vH6txMEkIXrxOJyHDcpkA_aZNYIW682hKfMYXcKIwTSoCKEHh-qkR0SVOadsKrAaVkWXx4a-b2CTxVAfbnLo2ZOzBVe2zZaECOTiive3ZJh8zw2i2kn9JVp5OOi32v-Qf2j3g7JPMj-7uj-JX94V4hyT6PbNh1puIWwaeZYbXp12FlM6o-cCG6kOnuDe2rfZVSMZYQskGqduJwYuVaRxwXhKMa7YS7xVlBf6j2UFNieWzQXLcFEkoIcBlqeLp5jkWvdO-W0k61fARptCoJbdxdcb3ukplwAW0aZWg4nGlrZBbbNNFQYOrracLgYanvzlPAYHzdjDV3Exznq0zCwIICT5t0jI7a932Pk45M_twnDTCPMKvxke-AfLueoArPojn-6r=w1258-h600-no)
Title: Re: UPDATE 9/22/16 Restoration Updates - 6S033
Post by: Brant on September 22, 2016, 11:43:10 AM
The engine is ready to go!

Click on the link to the Blog Post or on the picture itself for more pictures.

http://blog.virginiaclassicmustang.com/2016/09/just-details1966-shelby-gt350-289-hipo.html

(https://lh3.googleusercontent.com/p0WYPSgDPsqKP9szmKuw9_5_IqbeZOmSND7JlLb_NxEAZQn5LMX5Ukp24N12BVpKh1eF4wOgawib9FdiVVCs7zoRN1fJ3pVhvm8HY-zWT-wITgDozhXbXtHpzr-fMP6wSzQ8OBBPNDQ15ioKcwdyYnipSTZtgtMksy5MIcoafOVbiAxFmADM2_Xehfxhfq8O3oqduo0JjWIXF2Wx-i2029echkg9kUO8FBPiBCj8T3HQTJ1rfhr_BTM4j_gzVkGtg4PNEGi6MKS0cLhnZ4ORm6rUfcmuT2AhfdUGZFn-WZYWeW_M5myfyvzPfzQvtf0oALYHKdq_C0lNqIfVTMBurc7OQA00O6Qi3fr-IaRcSehCAUmgMcyq95Qu80XYzppMsXhX5W1V7OHYdMVG61x6RF0MzP3_NPDjCOO4bELBhgi8cw19tc6JOaOEx3C83dpvYetdNQkIAidYZtWwwUtkVK9oEUEIxadD0uzARdYVL3nnNLSke2igmr8RE8VLKoH_DyB43uoNPjNV2hEEUvzmMUIkoPX2ZCB0cTLU_bFJ1_OOTL5U1ZMjwKBL8Tg-69z_LxZQnOtSHTnDwMZ_dIzY_4c4BML2NgEJY1i-mQZ2yXVWq2BoNQ=w600-no-tmp.jpg) (http://blog.virginiaclassicmustang.com/2016/09/just-details1966-shelby-gt350-289-hipo.html)
Title: Re: UPDATE 9/22/16 Restoration Updates - 6S033
Post by: Building 3 on September 22, 2016, 04:30:16 PM
Question on the WSW tires:  What brand and size are they?  They look very good.
Title: Re: UPDATE 9/22/16 Restoration Updates - 6S033
Post by: Brant on September 22, 2016, 06:55:51 PM
Question on the WSW tires:  What brand and size are they?  They look very good.

Just to clarify for everyone, the thread is about a '66 Carryover GT350, and that's what the engine is going in.

Someone brought up the HiPo coupe too. To answer your question about the tires, they are 194/75 x 14 Kumho Solus KR21. I don't think they are even made anymore. It's getting tough to find a nice looking 14 inch tire...much less one with a whitewall.
Title: Re: UPDATE 10/19/16 Restoration Updates - 6S033
Post by: Brant on October 19, 2016, 10:13:31 AM
I posted another update last week with more pictures. Click on the link or the  picture below to see more pictures. I will have another update soon as the engine and transmission are now installed!

http://blog.virginiaclassicmustang.com/2016/10/just-details1966-shelby-gt350-mustang.html

(https://lh3.googleusercontent.com/F__lKdeFeUABjMTQIZ-xhtN8qF2UU4t_jbFmeuliiVhbEO-W9AZLyWd1nCIw3gWnTTeXAyrLrnHQ4POLV7pVBOvhgY3BR8XHXF5UGarvTCIqJtVnS_nTou7J6GTcxXp07vhWPNOfuhPvFwEp9BVAev7_BAbPyQyWd6gpOkgUcoqZz3JPCKjDePM-Yoa9ulOnk4rLJnogJcn4Rym9umQIQODqO4ORe7YH7F1pUMznXx5lPFS3b4zZsdobvSHL2TJw9ycGAne35h99uluBcV1znVv-1uQmqRis36bW1UOtnvhzKKPOTxNPKeAXRVdnhq-DdzuGM1AtqSuoLhX6xyHh5PspW6r-gBWdnjEy1irCaqTtIVzGTUo01iYPIIDcSUSeoyDKT_omzY_-msW5qkpFBc5Rp0n4GC-CVDwMBroTdHdC8r23OE9N8x-RFf2_8ZLZ3t46L0yhFrA6-heRXzxttQxjDrZmrN52pK3HKWicy6bhekn8F9JhwBgNAjJW_7bG3xlpPmZjO1lxPE9BZnPo8j7otzR9M_jTMFmsRsRqKryrCHEqwNQwQmjoBFalUOnD3XnIIabXvV7ShFJiyaT1CT9fqBAPOGxNzroF9JdohO-s5HUxiA=w600-no-tmp.jpg) (http://blog.virginiaclassicmustang.com/2016/10/just-details1966-shelby-gt350-mustang.html)
Title: Re: UPDATE 9/22/16 Restoration Updates - 6S033
Post by: J_Speegle on October 19, 2016, 10:33:23 PM
Thanks Brant - Jeremy is making great headway
Title: Re: UPDATE 9/22/16 Restoration Updates - 6S033
Post by: Building 3 on October 20, 2016, 04:42:48 PM
"Someone brought up the HiPo coupe too. To answer your question about the tires, they are 194/75 x 14 Kumho Solus KR21. I don't think they are even made anymore. It's getting tough to find a nice looking 14 inch tire...much less one with a whitewall."

You are correct. For the Concours Driven cars, the Kumho's are no longer available. Right now the WSW choices are Uniroyal, Hankook, and Toyo. (Of course in addition to the classic car specialty offerings.)
Title: Re: UPDATE 11/8/16 Restoration Updates - 6S033
Post by: Brant on November 08, 2016, 07:03:51 PM
Thanks for the comments.

I just posted some more pictures on the '66 Shelby restoration. It was interesting discovery to find the quarter window interior trim panels from 6S180 in 6S033!

Click on the link or the pictures:
http://blog.virginiaclassicmustang.com/2016/11/just-details1966-shelby-gt350-mustang.html


(https://lh3.googleusercontent.com/9Ymv-mW8tV60N_S2qJCsUY6WMZJ2ha6zFzhheIn6gR5UATXeNmn-cAslBZse7eHeSFYbivfClCAfrl7FWPM9y7tFwcbwe6b7uA5x34Anv3wmR05fVSPBMuUdfKeuNNriojZ5q4lVHlun69V4GRNpGrfBcaqrUud2jW6iH4a-nmeX41fqrbxBPNKrXwSRv-mggPE5dDZPgbLQPMBscBKUID-SsK-weD8WXkjL3htzrN6CjXgd9B_PUgKnmF05ufpshjICr2OLL3kNjKsizrj28ofbhT8sk2XY-wsC5aUSaT5Ppy8amZ9TVHVz4jw2qjetqCchJeQ5iMxxbuw00lJkQaJH3uKPTSwhaf5oj7Uqq2PqKr87pRD7cyIVkMfhood6YPUK0Wsiwpc7-lGXIRiSKoKMCQwK-h5Aah5ylalkOkm49L2tIzco2Skw88wWgLEJsfni1fkJ7wzYFGMBV833O2JJmWW_paBIfyZcyUyasfMfmrSq2rdZcRSjqzQbkY440SrZ086FQDu9mDD1VnNmH_96_mBadj-opB367fHWAbXoQbq9quPhxIXP4pUcqv7LTdea05lr3c1M7mUqHz8GmEMKudNzsN2LWb-9RzUQXep5b_iUUQ=w800-no-tmp.jpg) (http://blog.virginiaclassicmustang.com/2016/11/just-details1966-shelby-gt350-mustang.html)

(https://lh3.googleusercontent.com/1hsbIsTXc2bP49K7_Y1hZbBwnLADW9RS7cEfIQy9oqZr6CRQ7lz1P6qFKCrELLbMB_KNzGxwkY2Pjgz3zdXfLQM9bpZo0DLEIEhXp2afMJQVFfS5Gd4hXrlKTqdUSTeZV2Z2DoVjqxxL-5QvOFfZggqztNgk4CSTJfOv8ZSAJeB0J7wz_mTy2m5OSd3QQ0_cwKzTToxR6EIkTsJpy1XSzssU79Iws_rPTNszCKKv-F9G5-lgE9_ZeO_7Iv0sLlm_R-xLnstyJ4XS4hBmaZRty1jnPLjqQ4NFwQGLWz4MgPeBO8RjNUVT0H6Nx6qsmUHHXT3QhEYyXpWzgZ9TDEEo9tKPptRS7HhcBh_MnF7Mkp4dyRLkFLvOmdo5JJq5reehXFjiFwCbTfocGUR_juAzwFo7qYQjZ6o3Oyz5ksOYJ9bc7mWugPvFzDlydVNomer9c8kgk6DJvlyaRuvfdLqMIKjGyUZ7s-dPkpK4EMFHO9RPKfeim6eq1awourESnby9DWkNpadBISwQIwn3C90Wxl7M4DvDT9TNQRDe0glXw9-6u3l-7A2VyLmVOcsyZT3wUAQ7o56i5cLpVQZaFVl1t9zJyR-tApfd_ZiwAqx1mAkaRYWhqQ=w800-no-tmp.jpg) (http://blog.virginiaclassicmustang.com/2016/11/just-details1966-shelby-gt350-mustang.html)
Title: Re: UPDATE 11/8/16 Restoration Updates - 6S033
Post by: J_Speegle on November 08, 2016, 07:23:04 PM
Thanks for the comments.

I just posted some more pictures on the '66 Shelby restoration. It was interesting discovery to find the quarter window interior trim panels from 6S180 in 6S033!


Have seen this mismatch on other examples. BTW did you find any labeling on the back side of the interior rear quarter trim?

Thanks as always for sharing your progress
Title: Re: UPDATE 11/8/16 Restoration Updates - 6S033
Post by: Brant on November 10, 2016, 10:09:55 AM
Have seen this mismatch on other examples. BTW did you find any labeling on the back side of the interior rear quarter trim?

Thanks as always for sharing your progress

Jeff,

I didn't find any labeling on this car, but I have seen other early cars with a file folder type label identifying parts. Chuck Cantwell recalls that they were initially concerned that parts from one car may not fit properly in another car. They soon discovered that this wasn't an issue, and the parts got mixed up but with no problems concerning fit.
Title: Re: UPDATE 12/16/16 Restoration Updates - 6S033
Post by: Brant on December 16, 2016, 10:04:12 AM
I just posted some more pictures of the restoration of 6S033. It's getting there! Since these pictures, it's moving under its own power!

Click on the link or the picture to see more.

http://blog.virginiaclassicmustang.com/2016/12/just-details1966-shelby-gt350-mustang.html

(https://lh3.googleusercontent.com/kco6qEyVS0fz7OSsJs2Y6o5afBh39XrSQgpIqzIqHSMvLcCILh_o-K-oWd1fg4-9AP2mknS6cJ4dqTu_srg-VAqz3S2fTclX5K0kZqePfSaWlDWw3bocadeXup-uPi5lm-xDPmWggEI5HRQjtBluKh4mHFIg4wo429J_W9giFNBnglgFYwlR4PbYov-5V6soPmI70qiUC96a7jTMH_HVPEw1BvPxjaVFT8_a8lJkV7IOsanhEq_Dk6pyVZfdlqFpRRj6SwPssIk6gJONHofVEFE4XZX-qN7UXvqPl5VzH9VSJMiksNvyt0Pkot2_dibg17fNXec6cRS1jn8BxxRGEQ2qj0LSLDeJ0FppWEv2zndbqjHRPHc4W6cv4e7CI8QPNwnsi7fPbBH-bky2cfPJDkIybBTfOxwVNS6m-V-1G2gufz8GTPYknxvffRhlqdca15XVgIGn05rbG1kC5OOYHp5iRtYiEwFNB8_QSN5XJenuhUami5NFGOOd2M1MNwXVf6gVgtJqB-60FQuqjk1MsJwvB_YJglJKO7cgGNCOkVYDnJQqeCYJ6-01zZqidLGlwfTdyUsW8pCSCl2NQ5Br0Qe9fH0qE0SXmRTypXEhyy8VOnD8ayoC99zqRtk44rRvFxiOjBQCgrGy_fx6G6D70Gjvih-jLuETkEOHutxmj3c=w600-no-tmp.jpg) (http://blog.virginiaclassicmustang.com/2016/12/just-details1966-shelby-gt350-mustang.html)