1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year > 1969 Mustang
Decal Locations on a Dearborn 69 Mach 1
MEADOWFERN:
Hello, Trying to put the finishing touches on labeling my 69 Mach 1 now that everything is repainted. This is a Dearborn car produced on 6-18-69. This is an FMX automatic, posi rear, a/c, p/s, front disk brake car. I'm not finding much in the searches I've done. I have the decal renewal package from NPD. I've got the easy decals down: caution fan, tire pressure, spare tire, driver's inner shock tower spec label... it's all these other ones I need help with. Anybody have some photos to assist me with the rest? Much appreciated if you can forward, or point me to a site that shows them applied. Thanks in advance!
J_Speegle:
You missed one little detail - what engine??
Hope you didn't purchase one of the engine decal kits since it includes many un-needed/unoriginal decals (like the CAUTION decal! - not original to your car)
You should be looking to location
-The timing spec decal
-Air filter decal
-Completed battery test decal (hopefully you puchased the finished ECS decal for this)
-Engine ID tag/decal
Which others do you have that need a home?
While we are at it - which tire pressure decal did you get? Should be a D0ZA one
MEADOWFERN:
Sorry, I did forget a thing or two... yes, this is a 351W with the shaker air intake. Attached is a pdf of my remaining decals. Not sure which of these is relevant, or where they go. And yes, I did put the orange WARNING FAN on the shroud like most everyone else I've seen, ha ha! If there's a picture that shows location, or a verbal description, that would be great. Thanks in advance for any assistance. Evan
MEADOWFERN:
Hi, just checking back. Is this inquiry now dead, or will something become available? Thanks.
J_Speegle:
--- Quote from: MEADOWFERN on May 18, 2010, 11:22:02 PM ---Hi, just checking back. Is this inquiry now dead, or will something become available? Thanks.
--- End quote ---
Sorry this took some time - in years past questions like these took months to get answers to. It seems that in the age of the internet - everyone believes answers are instantaneous, are all available in some mystic cloud and require no research.
All we can ask is your patience as we try and help - so far I've got three four hours invested in this response. My main computer took a dump so I'm making do with a laptop with a small screen ;) I'm sure there are at least 30 people that think I'm ignoring their emails and post as I get to this one - for those seeing this thread I will get to you ea
OK I took your pdf and labeled each of the decals you have left - and placed corresponding
A- Emission/timing decal - located drivers side valve cover - See picture
B- Coil decal - would not use. Originally this was a ink stamp so the decal is the wrong practice, Then add the fact that it carries a 1970 date code
C- Jack decal - located lower arm ck of the jack - See picture
D- Battery check decal - you would need the ink date stamps and the inspector stamp to complete it. Rather than having stamps made up for this purpose (will run at least $20 for both if you had the art work) I suggest buying the ECS one since they can provide the 69 Dearborn one since that seems to be the one they reproduce
E & H- One of the inspector decals. These are difficult to place since they rarely survive leaving only the adhesive to indicate where they were My best guess would be in either position marked #1 or #2 for your year and month
F- Firewall somewhat centered - See picture
G- Located in drivers side door jamb - See picture
J & K- Neither was used originally on a car like yours
L- On rear valance under where the rear lic plate would be attached - See picture
As mentioned, there is still the engine id decal (marked M) that you don't have
Hope this helps and is worth the wait ;)
Navigation
[0] Message Index
[#] Next page
Go to full version