Author Topic: Citric acid dipping parts and discussion from Boss 302 forum with pics.  (Read 2509 times)

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9001
Re: Citric acid dipping parts and discussion from Boss 302 forum with pics.
« Reply #15 on: December 23, 2020, 11:43:05 PM »
Looks like a great outcome in light of the cost verses the cost of a 5 gallon pail of Evap o rust.
FYI Rust 911 concentrate is only about 4.00 a gallon when you buy the gallon bottle which is enough for 16 gallons.I use it because it is comparable in results yet is much less then evaporust . https://www.rust911.com/rust911-ultra-concentrate-rust-remover-dissolver-treatment-free-shipping/
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline DougDyar

  • Full Member
  • ***
  • Posts: 185
Re: Citric acid dipping parts and discussion from Boss 302 forum with pics.
« Reply #16 on: December 24, 2020, 09:21:04 PM »
Dan
I should have pointed out that my advice to use WD-40 was for parts that were to remain natural and need to be protected from rust.
Obviously a person doesn't want to oil down anything that's to be painted.
I think you have over-thought your predicament. Just re-dip your axle housing in the citric acid treatment. It's a great cleaner as well as rust remover. It'll take off the WD-40. But rinse with hot water this time and skip the wd40! Dry thoroughly and apply primer and paint.
Merry Christmas and Happy New Year!
Doug
0F02G203277
June 22, 1970 Dearborn BOSS 302

Offline BlackMcode1970mach1

  • Full Member
  • ***
  • Posts: 135
Re: Citric acid dipping parts and discussion from Boss 302 forum with pics.
« Reply #17 on: January 04, 2021, 07:00:36 PM »
i think i will try that  procedure  with my dash! ;D :)