Author Topic: factory installed stripes  (Read 2147 times)

Offline c9zx

  • Full Member
  • ***
  • Posts: 179
factory installed stripes
« on: February 05, 2011, 07:37:49 PM »
Is there anything on the build sheet indicating that a 1972 Mach 1 came with the hockey stick stripes?

Thanks, Chuck
Thanks, Chuck

1969 G code Cougar Eliminator
1972 Q code Mach 1, auto, air, 2F05Q183426, 03/16/72
CSX 7031

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24232
Re: factory installed stripes
« Reply #1 on: February 05, 2011, 08:04:28 PM »
Is there anything on the build sheet indicating that a 1972 Mach 1 came with the hockey stick stripes?


Think that might be box A -18
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline c9zx

  • Full Member
  • ***
  • Posts: 179
Re: factory installed stripes
« Reply #2 on: February 05, 2011, 09:14:30 PM »
Jeff,  A 18 Has a "M". A 19-20 has "6F". A 23-24 has "GF". Your help decoding is always appreciated. What can I do to educate myself in decoding the build sheets? I do appreciate your help but, I feel somewhat embarrassed to keep asking you for help in these matters. Am I doomed to the darkness that is ignorance?

Thanks Again,
Chuck
Thanks, Chuck

1969 G code Cougar Eliminator
1972 Q code Mach 1, auto, air, 2F05Q183426, 03/16/72
CSX 7031

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24232
Re: factory installed stripes
« Reply #3 on: February 06, 2011, 08:11:57 PM »
Jeff,  A 18 Has a "M". A 19-20 has "6F". A 23-24 has "GF". Your help decoding is always appreciated. What can I do to educate myself in decoding the build sheets? ................


There are no books or instruction manuals that I know of that will help you "learn" how to decode these. It would take a few thousand examples (buildsheets) with matching Marti reports and a bit of time. But almost everything you read on this forum started with an owner, magazine writer or hobbyist that had a question or need and choose to be the person that would start the ball rolling. Through the years we have learned allot for what started as an individual effort.

Everything starts somewhere ;)
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline nham3407

  • Sr. Member
  • ****
  • Posts: 465
Re: factory installed stripes
« Reply #4 on: February 08, 2011, 01:02:39 PM »
Chuck,

My build sheet indicates M in Box A 18.  This coincides with my Eminger Invoice indicating Body Side Tape stripe.  6f is your exterior color where mine is 4f for the Medium Lime Metallic.  I also have GA and do not know if that indicates Deluxe Mach 1 interior or the color.  My car has its original black Mach 1 deluxe interior that coincides with my Eminger invoice.  Do you have an Eminger on your car.  If not you should get it from Marti Works its a great tool to help out.
67 GT S-Code, San Jose, 06/67
72 Mach 1, Dearborn, 01/72
68 Merc. Cyclone, Lorain, 12/67 (Red)
68 Merc. Cyclone, Lorain, 6/68 (White)

Offline c9zx

  • Full Member
  • ***
  • Posts: 179
Re: factory installed stripes
« Reply #5 on: February 08, 2011, 11:25:14 PM »
Thanks Brian. I believe that answers the question. It came with stripes. I have them, just not sure I'll put them on. I had a 72 R code Mach 1 back in the day without the stripes and I really liked the look.

Chuck
Thanks, Chuck

1969 G code Cougar Eliminator
1972 Q code Mach 1, auto, air, 2F05Q183426, 03/16/72
CSX 7031