1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year > 1964 1/2 - 1965

1694.5 Flasher location

(1/1)

Corey Bowcutt:
I have a 1964.5 Convertible project I am working on.  I have gotten everything to work except the turn signals.  I have checked all fuses and they are good.  My next step was to check the flasher but I cannot for the life of me find it.  Any suggestions on where to look?  I have looked at the electrical assembly manual and electrical diagrams and that has been no help.

Thank you,

Corey

jwc66k:
An assembly line flasher "should be" in a bracket attached to the left vent, or very close to it. If you have a copy pf the 1964 Mustang Electrical Manual (AM0003), pg 15, it's shown as item 4.
If you are a "large" driver (I'm 6 ft), consider removing the driver's seat and placing a packing blanket on the floor. It goes easier on the back that way.
Jim

midlife:
Up until mid-1967, the turn signal flasher can power was ACC (non-fused) sourced; there was no fuse involved.  After that point, the turn signal slasher power was ACC fused, together with the radio and backup lights.

Navigation

[0] Message Index