Author Topic: 68 fender tag  (Read 2317 times)

Offline Oz390

  • Hero Member
  • *****
  • Posts: 729
68 fender tag
« on: February 11, 2012, 04:39:13 PM »
I'm looking at a 68 GT350 project.  The fender VIN tag has two numbers on it, the correct Shelby style VIN, just the VIN no -xxxxx after it.  It is stamped above the box where I have seen most (not many, no expert) so it sits below the snake emblem and above the box is stamped over the text "Vehicle Serial Number". 

There is a second longer 14 character number (alphanumeric) stamped in the box.

The font and reverese stamping looks like others I have seen.

Red flag???
8R03S : 76A I 2A 15M 72 5 U
8R01S : 65A B 2A 28M 72 7 5 - Factory GT
8R01C : 65A M 2A 01E 72 2 W - Cal Special
8F01X : 65A I 2A 2G 20E 24 1 U - EXP500 repli-bute

Offline rodster

  • Hero Member
  • *****
  • Posts: 1011
Re: 68 fender tag
« Reply #1 on: February 11, 2012, 04:52:03 PM »

With these cars, anything unusual should be researched.  There are many odd things but they are not always red flags.

If you are serious about purchasing this car, I suggest you gather together as much information and photos you can find and head over to

saacforum.com

and post your question in the 68 section. Lots of experts hang out there.

Good luck!
1965 Dearborn Mustang Coupe
Raven Black - Palomino Pony
1967 Dearborn Mustang Conv.
Wimbeldon White - Red
1984 SVO - 2A

Offline Oz390

  • Hero Member
  • *****
  • Posts: 729
Re: 68 fender tag
« Reply #2 on: February 11, 2012, 05:12:43 PM »
Thanks, I was not looking but it came up out of a sale of a PS pulley...  :o

Supposedly "complete" but the phots show some replaced steel (rear 1/4s), colors don't match Marti (not a huge deal but...) but supposedly in the registry...
8R03S : 76A I 2A 15M 72 5 U
8R01S : 65A B 2A 28M 72 7 5 - Factory GT
8R01C : 65A M 2A 01E 72 2 W - Cal Special
8F01X : 65A I 2A 2G 20E 24 1 U - EXP500 repli-bute

Offline rodster

  • Hero Member
  • *****
  • Posts: 1011
Re: 68 fender tag
« Reply #3 on: February 11, 2012, 06:20:27 PM »
Thanks, I was not looking but it came up out of a sale of a PS pulley...  :o

Funny how things happen!   ;D

Good luck!
1965 Dearborn Mustang Coupe
Raven Black - Palomino Pony
1967 Dearborn Mustang Conv.
Wimbeldon White - Red
1984 SVO - 2A

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24257
Re: 68 fender tag
« Reply #4 on: February 11, 2012, 07:07:46 PM »
I'm looking at a 68 GT350 project.  The fender VIN tag has two numbers on it, the correct Shelby style VIN, just the VIN no -xxxxx after it.  It is stamped above the box where I have seen most (not many, no expert) so it sits below the snake emblem and above the box is stamped over the text "Vehicle Serial Number". 
There is a second longer 14 character number (alphanumeric) stamped in the box.

Looks like your being careful - GOOD

Does it happen to be a very early car? If so that might explain the double VIN

Does it look more like the upper example shown below?





Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Oz390

  • Hero Member
  • *****
  • Posts: 729
Re: 68 fender tag
« Reply #5 on: February 11, 2012, 08:02:15 PM »
Jeff, yes as the upper. been looking further on the web and it is the early dual stamp, had not known of that varaint before.

And to drop the coin, i'll be asking a lot of questions.  Caveat emptor!

Now to decide if I can afford a 5th Mustang and a Shelby to boot!  ;)
8R03S : 76A I 2A 15M 72 5 U
8R01S : 65A B 2A 28M 72 7 5 - Factory GT
8R01C : 65A M 2A 01E 72 2 W - Cal Special
8F01X : 65A I 2A 2G 20E 24 1 U - EXP500 repli-bute