Author Topic: 1972 Mach 1 Tape stripe location  (Read 2636 times)

Offline ceswert

  • Silver Level Subscriber
  • Full Member
  • ****
  • Posts: 162
1972 Mach 1 Tape stripe location
« on: October 17, 2011, 12:13:39 AM »
Were original tape stripes on a 1972 Mach 1 applied to stop at the edge of the door or did the tape wrap around the door edge slightly?
67' Shelby GT 350 nm blue/4sp/#0089
07' Shelby Super Snake 725hp/white/#0073
71' Mach 1 429cj grabber blue/4 sp./ac

Offline c9zx

  • Full Member
  • ***
  • Posts: 179
Re: 1972 Mach 1 Tape stripe location
« Reply #1 on: October 17, 2011, 09:53:43 AM »
They wrapped around about 3/8 - 1/2.  Chuck
Thanks, Chuck

1969 G code Cougar Eliminator
1972 Q code Mach 1, auto, air, 2F05Q183426, 03/16/72
CSX 7031

Offline ceswert

  • Silver Level Subscriber
  • Full Member
  • ****
  • Posts: 162
Re: 1972 Mach 1 Tape stripe location
« Reply #2 on: October 17, 2011, 10:12:58 AM »
Thanks Chuck. I thought that was the case.
67' Shelby GT 350 nm blue/4sp/#0089
07' Shelby Super Snake 725hp/white/#0073
71' Mach 1 429cj grabber blue/4 sp./ac

Offline c9zx

  • Full Member
  • ***
  • Posts: 179
Re: 1972 Mach 1 Tape stripe location
« Reply #3 on: October 17, 2011, 10:17:37 AM »
I'm glad to see some activity on the 71-73 cars. I was beginning to think it was just me and Brian.  Chuck
Thanks, Chuck

1969 G code Cougar Eliminator
1972 Q code Mach 1, auto, air, 2F05Q183426, 03/16/72
CSX 7031

Offline ceswert

  • Silver Level Subscriber
  • Full Member
  • ****
  • Posts: 162
Re: 1972 Mach 1 Tape stripe location
« Reply #4 on: October 17, 2011, 10:57:27 AM »
I have always appreciated 71-73 Mustang models. In addition to my '72 Q code I own a '73 Mustang convertible Q code which is awaiting restoration and a recently purchased '71 J code that is currently being restored. All of my cars are survivors, retaining much original metal and parts. Really appreciate your site!
67' Shelby GT 350 nm blue/4sp/#0089
07' Shelby Super Snake 725hp/white/#0073
71' Mach 1 429cj grabber blue/4 sp./ac

Offline nham3407

  • Sr. Member
  • ****
  • Posts: 465
Re: 1972 Mach 1 Tape stripe location
« Reply #5 on: October 17, 2011, 03:08:11 PM »
Since I am referenced in this email only thought it was appropriate to chime in.  Agreed that this can be a lonely fraternity at times, but we always welcome new pledges (without hazeing).  Ceswert, I noted your earlier post on the primer color.  I grew up in AMC's home town.  I am not aware of any military division closure around that time, but that was probably through the Jeep division headquartered in Toledo.  I do know Ford and AMC used alot of similiar suppliers.  One few people know of is the intermittent wiper governor and switch.  These are direct interchanges between ford and AMC that AMC continued on production over several years after ford.

Chuck and I tend to troll this forum often as we are trying to maintain as much orginality for this generation.  Keep in touch with us if you have any questions.  Chuck is a great resource and he has a great car to show for it.  Mine is just going in for paint this weekend.  I am giving him at most 12 months to get it done.  My goal is concourse driven by 2014 for the 50th.
67 GT S-Code, San Jose, 06/67
72 Mach 1, Dearborn, 01/72
68 Merc. Cyclone, Lorain, 12/67 (Red)
68 Merc. Cyclone, Lorain, 6/68 (White)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24232
Re: 1972 Mach 1 Tape stripe location
« Reply #6 on: October 17, 2011, 06:37:47 PM »
...................Chuck and I tend to troll this forum often as we are trying to maintain as much orginality for this generation.  .................


Thanks guys  ;)
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline ceswert

  • Silver Level Subscriber
  • Full Member
  • ****
  • Posts: 162
Re: 1972 Mach 1 Tape stripe location
« Reply #7 on: October 17, 2011, 09:12:08 PM »
I appreciate your knowledge on these Mustang subjects. I will try to get additional information on the primer 
67' Shelby GT 350 nm blue/4sp/#0089
07' Shelby Super Snake 725hp/white/#0073
71' Mach 1 429cj grabber blue/4 sp./ac