Topic: Need Pair of Convertible Top Pivot Plates.

[NEFaurora]

Need Pair of Convertible Top Pivot Plates. (Desperately!)

These are the two plates (one on each side) that have a permanent built in pivot pin, and has two bolts going through it to secure it.  I need both of these plates.  They were both missing from my '65 convertible when I picked it up.  Some dummy removed them. The non-power top convertible cars also use these same pivot plates and they have them as well for the manual non power spring driving cylinders. The pivot pin plates were used with both Power and non-power top cars.

If you have a beater or junker convertible lying around, Please e-mail me.

E-mail me at NEFaurora@aol.com and send a pics or two also.

Thanks!

Tony K.

[Oz390]

Don't have any spares but they don't look like they would be too hard to fabricate.  Machining the studs would be the hardest bit, but they are fairly simple.  While not "correct" something most would never even notice if done well.

If you want photos and dimensions let me know.

[fdcarman]

HELLO   I AM SURE I HAVE AND WILL LOOK   LET ME KNOW IF YOU STILL HAVE  JOHN

[fdcarman]

  DUMB I MENT NEED

[NEFaurora]

I've found an located a pair of these.  Thanks guys!!!

You are all the best!

Tony K.