« previous next »
Pages: [1]   Go Down

Author Topic: Floor pan drip's.  (Read 1651 times)

Offline slingslingbinks

  • Newbie
  • *
  • Posts: 39
Floor pan drip's.
« on: July 27, 2013, 01:21:25 AM »
Well today i painted the bottom of the 64 with the slop and i'm not happy with the paint drips. Tried it thick and thinned it with acetone. All i got was a few drip's. Need a way to squirt the paint on instead of using a air paint gun. Any ideas?

Thank's Scott.
Logged

Offline jmlay

  • Full Member
  • ***
  • Posts: 109
Re: Floor pan drip's.
« Reply #1 on: July 28, 2013, 12:50:25 AM »
This is just a shot in the dark & I have no idea if it will work or not. You could put the paint in a shallow tray & "dip" the floor pan in it. If the wife gets upset because you used one of her good baking trays it was not me to suggested it.  8)
Logged
Mike

1969 Mach1 428 CJ Ram Air
San Jose
Scheduled Build: 1/2/1969
Actual Build: 1/3/1969
Released: 1/8/1969

Offline slingslingbinks

  • Newbie
  • *
  • Posts: 39
Re: Floor pan drip's.
« Reply #2 on: July 28, 2013, 02:29:33 AM »
Ha, That's too funny Jmlay.
Well i got the body back on the rotisserie tonight and later this week, I'm going to shoot a few bald spot's and take some of the slop and suck it into a old surenge that's left over from giving our dog's some shot's and pump it on the rib's and i'll let ya know how it worked out
Logged

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24258
Re: Floor pan drip's.
« Reply #3 on: July 28, 2013, 08:12:40 PM »
Have heard of guys applying paint with a rattle can to the ribs and low hanging points on the floor then overcoating all with the final color
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline jtfx6552

  • Full Member
  • ***
  • Posts: 172
Re: Floor pan drip's.
« Reply #4 on: August 04, 2013, 03:30:29 PM »
Logged
1965 Mustang Fastback, October 29, 1964 Dearborn Build, In the family since new.
Pages: [1]   Go Up
« previous next »