Author Topic: where to buy correct parts for a 64,5  (Read 1764 times)

Offline norway_t

  • Newbie
  • *
  • Posts: 3
where to buy correct parts for a 64,5
« on: November 24, 2013, 10:22:31 AM »
i'm refurbishing a 64,5 conv. Its been restored some 15 years ago and some of the parts would need changing. i will try to restore as much as the original 64,5 ford parts as possible, but where do i look for CORRECT repro parts? . (yes i could trawl the net for ages for NOS parts - but will like the car finished by spring). What company would you recomend.

Offline carlite65

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2375
Re: where to buy correct parts for a 64,5
« Reply #1 on: November 24, 2013, 11:27:54 AM »
one of my favorite vendors is virginia classic mustang. the other is npd. both are highly reputable.
5F09C331248

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7153
Re: where to buy correct parts for a 64,5
« Reply #2 on: November 24, 2013, 12:23:27 PM »
one of my favorite vendors is virginia classic mustang. the other is npd. both are highly reputable.
And both have senior management posting on this forum, and they listen.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1202
  • There is no end to doing right. Giddyup!!!
Re: where to buy correct parts for a 64,5
« Reply #3 on: November 25, 2013, 10:55:54 AM »
  I buy almost exclusively from Virginia Classic Mustang. Excellent to deal with, orders are always packaged very well,  and they carry the best "quality" repro parts. Believe me, there are differences in repro parts! ;)
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline suskeenwiske

  • Sr. Member
  • ****
  • Posts: 417
  • 214-347-3628
Re: where to buy correct parts for a 64,5
« Reply #4 on: November 25, 2013, 09:05:10 PM »
Same for me; NPD mostly, just starting to look into Virginia Mustang and occasionally K.A.R. Might do more with K.A.R. but they're just too high on many things.

Ray
Ray
1965 Dearborn Coupe
6 Cylinder, AT, PB, PS, AC
Est. Build 23A

Offline carlite65

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2375
Re: where to buy correct parts for a 64,5
« Reply #5 on: November 25, 2013, 09:08:13 PM »
another favorite of mine is the mustang barn. http://www.mustangbarn.com  lots of used stuff & knowledge there too.
5F09C331248

Offline norway_t

  • Newbie
  • *
  • Posts: 3
Re: where to buy correct parts for a 64,5
« Reply #6 on: November 26, 2013, 01:55:41 AM »
thanks for the answers guys, already making shopping baskets on virginia and npd. Was'nt aware of neither before....

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7153
Re: where to buy correct parts for a 64,5
« Reply #7 on: November 26, 2013, 12:36:24 PM »
Plan your purchases and take advantage of all discounts, taxes, shipping charges and specials. I use a spreadsheet to create a buy list and it has worked well for over 20 years for me (I was a production planner in an earlier life). You will find that about 80 to 90 percent of the available parts are offered by all catalog suppliers. It's that last 10-20 percent that are single sourced. Customer service is another factor, there are sellers that have very poor customer service. If you do some reading about parts you will find the good sources stated as such, the bad suppliers are usually not discussed. Avoid a supplier that you cannot find a good (or any) review. The bottom line is, if the price seems too good to be true, it may very well be.
There are other sources of parts to consider.
AMK is a major supplier of hardware (they don't make any) and they supply almost all the sellers, but they also sell direct.
Coker tires sell reproduction tires thru catalog sellers and direct too.
Jim

I promise to be politically correct in all my posts to keep the BBBB from vociferating.