1
1968 Mustang / Re: 1968 San Jose GT 390 Fastback Drivers Side Mirror mounts
« Last post by dkknab on Today at 08:35:11 AM »If your originals do not spin I recommend running a #8-24 tap through them to remove any paint that might be there before trying to install the mirror.
My original inserts on the driver side both spin. I purchased a nutsert tool from Amazon, the one with the long arms for leverage, and was able to tighten up both of the inserts. I used a 10-24 tap to clean out the hole and reinstalled the mirror using 10-24 Phillips Oval head screws, not the Phillips Oval head sheet metal screws that were installed originally.