ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Mustang => Topic started by: J_Speegle on February 07, 2011, 09:40:13 PM
-
OK - can't remember this moment :(
Correct finish for the brake pad retainers (disc brakes) on an approx Nov 66 built 67 San Jose Mustang/Shelby
Thanks
-
OK - can't remember this moment :(
Correct finish for the brake pad retainers (disc brakes) on an approx Nov 66 built 67 San Jose Mustang/Shelby
Thanks
I have seen some that were apparently bare steel on the smaller 67 style retainers and others that appeared to have been zinc phosphated. Bob
-
Thanks Bob - I've got choices :-\
-
Yeah, it's been quite a while since this was posted.
Have we learned anything different? Bullett68s query regarding 68s and my current cleanup of my 67 SJ K/H calipers has me asking.
-
Yeah, it's been quite a while since this was posted.
Have we learned anything different? Bullett68s query regarding 68s and my current cleanup of my 67 SJ K/H calipers has me asking.
Other then I am leaning more toward phosphate and oil upon reflection. Given other retaining hardware of the same function are finished that way and if they were bare steel in that exposed location they would be more apt to rust away . There are enough examples to conclude that was not always the case so the PO is most likely IMO.
-
OK - can't remember this moment :(
Correct finish for the brake pad retainers (disc brakes) on an approx Nov 66 built 67 San Jose Mustang/Shelby
Thanks
So when was the split from early design caliper (early design retainers) to the 2nd design caliper with 2 retainers each side?
My 11/02/66 built has the original calipers still and are the early design, like a 65 or 66 Mustang type.
-
So when was the split from early design caliper (early design retainers) to the 2nd design caliper with 2 retainers each side?
My 11/02/66 built has the original calipers still and are the early design, like a 65 or 66 Mustang type.
My guess is late NOV/66 or early DEC/66.
-
So when was the split from early design caliper (early design retainers) to the 2nd design caliper with 2 retainers each side?
My 11/02/66 built has the original calipers still and are the early design, like a 65 or 66 Mustang type.
And probably the same time hose fitting size and hardware changed too.
-
Ok, PO it is! Thanks, Bob.
I've also updated this post:
http://www.concoursmustang.com/forum/index.php?topic=13837.msg139939#msg139939
-
Bump...
I edited my ealier question to add context of Jeff's very old question that began this thread.