ConcoursMustang Forums

Marketplace => Wanted Ads => Topic started by: 67gtasanjose on October 22, 2014, 01:43:05 PM

Title: WTB 1 thermactor hose hoop/holder 376906-S from 67 Mustang Chassis Assy. Manual
Post by: 67gtasanjose on October 22, 2014, 01:43:05 PM

This hoop hose holder mounts on top of AC compressor to support the AIR injection hose (heater hose size hose) going the "T", to the drivers side check valve.

It may be used elsewhere but I wouldn't know. I believe it to be a plastic wrapped "P" shaped metal strap with a 3/8" diameter hole in it.

Richard

Title: Re: WTB 1 thermactor hose hoop/holder 37906-S from 67 Mustang Chassis Assy. Manual
Post by: jwc66k on October 22, 2014, 04:09:51 PM

Richard,
- Check the part number in your subject.
- Check the spreadsheet in the library entitled "Mustang Hardware Spreadsheet" for other applications (after you get the correct part number)
- Check your e-mail - re the nut.
Jim 

Title: Re: WTB 1 thermactor hose hoop/holder 376906-S from 67 Mustang Chassis Assy. Manual
Post by: 67gtasanjose on October 22, 2014, 04:28:02 PM

Quote from: jwc66k on October 22, 2014, 04:09:51 PM

- Check the part number in your subject.
- Check the spreadsheet in the library entitled "Mustang Hardware Spreadsheet" for other applications (after you get the correct part number)
.
Jim 

CORRECTED, I was missing a "6", thanks Jim!

Description: 7/8W,2 45/64OA L,1 3/16LOOP,15/32HOLE,RUBBER
USAGE: (limited) 289 enigines, all with thermactor and AC (66-67 only?)


Richard

Title: Re: WTB 1 thermactor hose hoop/holder 376906-S from 67 Mustang Chassis Assy. Manual
Post by: 67gtasanjose on October 16, 2017, 06:20:45 AM

I am still hunting this item...

Title: Re: WTB 1 thermactor hose hoop/holder 376906-S from 67 Mustang Chassis Assy. Manual
Post by: J_Speegle on October 19, 2017, 06:30:09 PM

Discussion of details moved to http://www.concoursmustang.com/forum/index.php?topic=16774.0 (http://www.concoursmustang.com/forum/index.php?topic=16774.0)

Title: Re: WTB 1 thermactor hose hoop/holder 376906-S from 67 Mustang Chassis Assy. Manual
Post by: 67gtasanjose on October 19, 2017, 06:55:52 PM

Thanks.

Search seems to be over at this time. I have one on the way to "borrow" for "copying" details. I'll post a "how to" in the other thread ;) Cannot be to difficult to make one from scratch :)