Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Join us on Facebook: Search for 'ConcoursMustang' Private group!
Home
Help
Login
Register
ConcoursMustang Forums
»
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year
»
1967 Mustang
»
Topic:
67 - Radiator support
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: 67 - Radiator support (Read 731 times)
rocnhrse
Full Member
Posts: 135
67 - Radiator support
«
on:
February 09, 2018, 02:19:01 PM »
67 S code GTA San Jose April 67
Is there a difference in sizes between any of the radiator supports small block vs big block, I put in a NOS rad support and it is too narrow for the holes to line up on the 390 radiator shroud
«
Last Edit: February 09, 2018, 02:54:09 PM by J_Speegle
»
Logged
67 mustang GTA S code fastback San Jose April 67
196667Bob
Hero Member
Posts: 1042
Re: Radiator support
«
Reply #1 on:
February 09, 2018, 02:55:04 PM »
Master Parts Catalogs show only one radiator support, with no engine differentiation. Original Part # C7ZZ-16138-A, which was replaced by C7ZZ-16138-B in March of 1968.
Bob
Logged
1966 Coupe, C Code, 3 Sp MT, 6T07C154XXX, Build Date 11/22/65
1967 Conv, C Code, C4, 7F03C154XXX, Actual Build Date 01/31/67
MCA 04909
J_Speegle
Administrator
Hero Member
Posts: 24241
Re: 67 - Radiator support
«
Reply #2 on:
February 09, 2018, 02:58:20 PM »
There is an early and late version (change was during 67 production) of the radiator support but not one for each engine size but it didn't include a change in bolt hole locations
The radiator shroud on a big block does not attach to the radiator support and the radiator is not directly attached either but instead cradled between an upper and a paint of lower insulated mounts as discussed in another thread last week I believe
Picture of your issue and the parts your working with might help
Logged
Jeff Speegle
Anything worth doing is worth doing concours
rocnhrse
Full Member
Posts: 135
Re: 67 - Radiator support
«
Reply #3 on:
February 09, 2018, 03:13:36 PM »
My inexperience got the best of me , didn't do my research got my rad shroud today and thought it would line up with holes in rad support ,there wasn't one on the car when I got it might be missing some brackets
Logged
67 mustang GTA S code fastback San Jose April 67
196667Bob
Hero Member
Posts: 1042
Re: 67 - Radiator support
«
Reply #4 on:
February 09, 2018, 03:19:48 PM »
Jeff is of course correct in that the 390 Radiator did not mount into the holes on the radiator support as did 289 radiators.
I should have attached the following from the Body Assembly Manual.
Bob
Logged
1966 Coupe, C Code, 3 Sp MT, 6T07C154XXX, Build Date 11/22/65
1967 Conv, C Code, C4, 7F03C154XXX, Actual Build Date 01/31/67
MCA 04909
rocnhrse
Full Member
Posts: 135
Re: 67 - Radiator support
«
Reply #5 on:
February 09, 2018, 07:59:57 PM »
Thanks for information , great forum for restoration problems
Logged
67 mustang GTA S code fastback San Jose April 67
67gta289
Hero Member
Posts: 3025
Re: 67 - Radiator support
«
Reply #6 on:
February 09, 2018, 09:17:28 PM »
To help connect the dots, the early - late differences were discussed in detail in these two posts:
http://www.concoursmustang.com/forum/index.php?topic=5026.msg56704#msg56704
http://www.concoursmustang.com/forum/index.php?topic=16047.msg101693#msg101693
Logged
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660
Print
Pages: [
1
]
Go Up
« previous
next »
ConcoursMustang Forums
»
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year
»
1967 Mustang
»
Topic:
67 - Radiator support