Author Topic: What would keep the fuel sending unit from working?  (Read 882 times)

Offline Matt1968

  • Jr. Member
  • **
  • Posts: 63
What would keep the fuel sending unit from working?
« on: June 19, 2018, 04:54:29 PM »
It works fine outside of the tank (lead hooked up, a ground wire attached from sender to tank opening). Gauge works the full range.

Installed with 5 gallons of gas poured in (16 gal tank) it reads fully empty. Float is currently in a pot of water, not sinking.

What's going one?

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3025
Re: What would keep the fuel sending unit from working?
« Reply #1 on: June 19, 2018, 06:46:02 PM »
Bad ground sending unit to tank and/or tank to body and/or body to battery
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2158
    • Midlife Harness Restorations
Re: What would keep the fuel sending unit from working?
« Reply #2 on: June 19, 2018, 08:51:50 PM »
Another possibility is a broken wire for the fuel sending unit (yellow/white).  Yet another possibility is that the gauge itself is mis-positioned on the dash cluster, causing it to be grounded.  When that happens, other gauges (water temperature, oil pressure) are also off.
Midlife Harness Restorations - http://midlifeharness.com