Author Topic: Early square corner sill plates for coupe or fastback 1964 1/2 - 1965  (Read 466 times)

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1202
  • There is no end to doing right. Giddyup!!!
 I have a pair of the early square corner sill plates. Have had these as an extra set but realizing I will not be needing them.
They are in nice condition for their age with no severe scratches or dents and the mounting holes in great shape. However, there are some areas of pitting, right near the middle where the seatbelts would lay. Of course these are not made reproduction so would be concourse correct for an early coupe or fastback. These have not been polished or cleaned up and I assume could be made to look very nice. (I had another set polished for my 64' which turned out great)
Please refer to the pictures as part of the description and feel free to reach out with any questions or if additional pictures are needed.

$85.00 using PayPal friends/family, buyer to pay shipping costs of their preference.


Thanks



Thanks
« Last Edit: September 29, 2022, 02:17:48 PM by carlite65 »
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline kcodecoupe

  • Sr. Member
  • ****
  • Posts: 440
Re: Early square corner sill plates for coupe of fastback 1964 1/2 - 1965
« Reply #1 on: September 16, 2022, 12:08:13 PM »
I sent you a pm on these, chuck.

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1202
  • There is no end to doing right. Giddyup!!!
Re: Early square corner sill plates for coupe of fastback 1964 1/2 - 1965
« Reply #2 on: September 16, 2022, 12:14:39 PM »
Sale pending...

Thx Chuck
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline kcodecoupe

  • Sr. Member
  • ****
  • Posts: 440
Re: Early square corner sill plates for coupe of fastback 1964 1/2 - 1965
« Reply #3 on: September 29, 2022, 01:27:19 PM »
The sill plates came today ,nice originals,thanks Bill.

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1202
  • There is no end to doing right. Giddyup!!!
Re: Early square corner sill plates for coupe or fastback 1964 1/2 - 1965
« Reply #4 on: September 29, 2022, 06:33:06 PM »
 Glad to hear.

Thank you
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1202
  • There is no end to doing right. Giddyup!!!
Re: Early square corner sill plates for coupe or fastback 1964 1/2 - 1965
« Reply #5 on: October 03, 2022, 10:14:39 AM »
SOLD...
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'