Author Topic: 1967 14" Styled Steel Wheels  (Read 7058 times)

Offline travnemi

  • Full Member
  • ***
  • Posts: 169
  • Travis Waters
1967 14" Styled Steel Wheels
« on: September 02, 2014, 08:56:20 PM »
I have a 1967 Mustang Fastback 390 GTA, the Marti Report says it came with 14" Styled Steel Wheels. When I went to purchase them, there were many styles of them. Any help would help. Many options to choose from Like 5.5", 6" wide wheels, Black rims with chrome centers and beauty rings, like in the attached photo. http://www.cjponyparts.com/scott-drake-wheel-14-inch-x-5-5-inch-styled-steel-1967/p/W526-V/
Thanks in advance,
Travis Waters
« Last Edit: September 02, 2014, 09:23:13 PM by travnemi »
Travis Waters

Mine -
1967 Mustang GTA S Code, Fastback, San Jose, Built Dec. 13, 1966 (Thermactor)

Daddy / Daughter Project -
1967 Mustang S Code, Fastback, San Jose, Built Sept. 9, 1966

Offline krelboyne

  • Hero Member
  • *****
  • Posts: 1193
    • West Coast Classic Cougars
Re: 1967 14" Styled Steel Wheels
« Reply #1 on: September 02, 2014, 09:45:16 PM »
For 1967 I believe that they should be 14 x 5-1/2 wide with beauty rings. The MPC calls out 'painted grey'.
Scott Behncke - Carcheaologist
West Coast Classic Cougars
503-463-1130
1968 GT/CS 302-4V San Jose 05B
1968 Cougar XR7 Dearborn 09A

Offline travnemi

  • Full Member
  • ***
  • Posts: 169
  • Travis Waters
Re: 1967 14" Styled Steel Wheels
« Reply #2 on: September 02, 2014, 09:51:20 PM »
I wasn't sure if the rim is supposed to be black with chrome center and black inserts like the photo or if the rim was all chrome with black inserts. Here's what I have to choose from,
Travis Waters

Mine -
1967 Mustang GTA S Code, Fastback, San Jose, Built Dec. 13, 1966 (Thermactor)

Daddy / Daughter Project -
1967 Mustang S Code, Fastback, San Jose, Built Sept. 9, 1966

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3025
Re: 1967 14" Styled Steel Wheels
« Reply #3 on: September 02, 2014, 09:59:43 PM »
14x5.5, rim painted black, centers around stud holes a charcoal gray. Trim rings (I believe polished and not brushed for 67 but not 100% sure on that detail).  The lower one looks more correct, but can't tell if the centers are black or gray.  Originals of course are riveted not welded ;)
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline travnemi

  • Full Member
  • ***
  • Posts: 169
  • Travis Waters
Re: 1967 14" Styled Steel Wheels
« Reply #4 on: September 03, 2014, 10:14:26 PM »
The centers are supposed to have charcoal gray and not the bronze?

Thanks
Travis Waters

Mine -
1967 Mustang GTA S Code, Fastback, San Jose, Built Dec. 13, 1966 (Thermactor)

Daddy / Daughter Project -
1967 Mustang S Code, Fastback, San Jose, Built Sept. 9, 1966

Offline travnemi

  • Full Member
  • ***
  • Posts: 169
  • Travis Waters
Re: 1967 14" Styled Steel Wheels
« Reply #5 on: September 03, 2014, 10:21:53 PM »
I have another question. The color of the center caps
Travis Waters

Mine -
1967 Mustang GTA S Code, Fastback, San Jose, Built Dec. 13, 1966 (Thermactor)

Daddy / Daughter Project -
1967 Mustang S Code, Fastback, San Jose, Built Sept. 9, 1966

Offline denonito

  • Newbie
  • *
  • Posts: 18
Re: 1967 14" Styled Steel Wheels
« Reply #6 on: September 03, 2014, 11:33:05 PM »
To  67gta289
    Even though it is a Cougar shop, WCCC(West Coast Classic Cougar) has a lot of info about Mustangs on their website. They show that 1968 is the only year that both Cougar and Mustangs had trim rings with the brushed look(http://www2.cougarpartscatalog.com/c8zz-1210-b.html) on the trim rings, so 67 would be chrome. I actually have 68 Cougar styled steel on my '67 coupe with 68 trim rings and red mustang centers, painted "dark argent" instead of the light argent that is correct for the Cougar. It doesn't look bad to most people, but then they don't know it's not correct.
7R01A San Jose built, UEK1xx CA Black/Yellow

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24232
Re: 1967 14" Styled Steel Wheels
« Reply #7 on: September 04, 2014, 02:30:22 AM »
I have another question. The color of the center caps

Blue and the chrome base is designed with a somewhat scalloped/spoke design










To  67gta289
    Even though it is a Cougar shop, WCCC(West Coast Classic Cougar) has a lot of info about Mustangs on their website. They show that 1968 is the only year that both Cougar and Mustangs .......

Don't know about all years of Cougars  - Ford describes 70 and 71 at least as brushed also but all this talk is getting off thread a bit ;)
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1202
  • There is no end to doing right. Giddyup!!!
Re: 1967 14" Styled Steel Wheels
« Reply #8 on: September 04, 2014, 01:03:00 PM »
   +1  Here's my 67 coupe with styled steels. 14x5.5, black rim, charcoal gray painted center, blue center caps. Been years since i did this same research but seems to be still correct to this day.  ;)
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline travnemi

  • Full Member
  • ***
  • Posts: 169
  • Travis Waters
Re: 1967 14" Styled Steel Wheels
« Reply #9 on: September 04, 2014, 10:45:51 PM »
SWEET THANKS!!! I was pulling my hair out, trying to figure out which ones to get.
Travis Waters

Mine -
1967 Mustang GTA S Code, Fastback, San Jose, Built Dec. 13, 1966 (Thermactor)

Daddy / Daughter Project -
1967 Mustang S Code, Fastback, San Jose, Built Sept. 9, 1966

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5086
  • "Take the MUSTANG PLEDGE"
Re: 1967 14" Styled Steel Wheels
« Reply #10 on: January 02, 2015, 01:48:18 PM »
I'm cleaning up & repainting my OE styled steel wheels (has the rivets).

Anybody with a good recommendation for the CHARCOAL color?

ALSO: It looks like the outer BLACK portion of the wheels may have been dipped rather than sprayed. Any good ideas how to try and duplicate these two different finishes, a durable "do-able" process that will last? I will have all the paint removed after the EvapoRust eats away the rust. Since there was some minor pitting inside the wheel, Boeshield should work to help keep rust from returning I think..but I was looking for a process order after all the rust and paint is gone. Something on the order of:

1.) Clean Wheels and soak in Evaporust till all rust is gone.
2.) Aviation Stripper on any remaining paint.
3.) (next step?)
4.) (next step?)
5.) (next/final step?)
6.) Mount & Balance Tires

I have 3rd wheel soaking in Evaporust, first two already de-rusted, I am stripping the paint now.
« Last Edit: January 02, 2015, 02:19:49 PM by 67gtasanjose »
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Online jwc66k

  • Hero Member
  • *****
  • Posts: 7135
Re: 1967 14" Styled Steel Wheels
« Reply #11 on: January 02, 2015, 05:49:36 PM »
If the chrome is OK, then lightly sand and paint the backs and rim part of the front semi-gloss black. Then mask and paint the charcoal. If the chrome is not OK, think new.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline mtinkham

  • Sr. Member
  • ****
  • Posts: 359
  • That'll be easy
Re: 1967 14" Styled Steel Wheels
« Reply #12 on: July 14, 2023, 08:37:34 PM »
I know this is a very old thread. Wondering what paint is recommended for the argent portion of the wheels. These would be for my signature car, if plant and time-frame make a difference.

Thanks,
Mark
1967 S-code Fastback, GT, 3-speed manual, Metuchen, Scheduled 04-21-1967 - Actual 04-25-1967

Offline mtinkham

  • Sr. Member
  • ****
  • Posts: 359
  • That'll be easy
Re: 1967 14" Styled Steel Wheels
« Reply #13 on: July 20, 2023, 01:50:05 PM »
So simply charcoal paint would be applicable?
1967 S-code Fastback, GT, 3-speed manual, Metuchen, Scheduled 04-21-1967 - Actual 04-25-1967

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3838
Re: 1967 14" Styled Steel Wheels
« Reply #14 on: July 20, 2023, 02:41:10 PM »
I think it was called dark argent.