1
1967 Mustang / Re: 1967 Fastback 289 2V Engine Mounts
« Last post by RoyceP on Today at 05:52:53 PM »eBay has them, or WCCC.
News:
Join us on Facebook: Search for 'ConcoursMustang' Private group!
Recent Posts
2
1967 Mustang / Re: 1967 Fastback 289 2V Engine Mounts
« Last post by RickP330 on Today at 03:14:26 PM »Allright,
Keep it pure - I get it! So where would be the best place to find Factory 1968 frame side mounts and Engine mounts? Or factory parts for that matter? All I know of is the reproduction stuff....
RP
Keep it pure - I get it! So where would be the best place to find Factory 1968 frame side mounts and Engine mounts? Or factory parts for that matter? All I know of is the reproduction stuff....
RP
3
1969 Mustang / Re: 69 Grande stripe
« Last post by J_Speegle on Today at 01:18:04 PM »Hi all.
Finally i bought the Stripes which most of the cars on the pictures seema to have: black with gold accent. Another reason was that i did Not find a company which sells black with white accent.
Now I mounted the stripes on my pony and what did I find? At the inner Side of the passenger door there is a small rest of the original Stripes... Black with white accent.... So I will continue to search the correct one for my car...
Nice find though it just adds to the challenge but just another to overcome.
Allot of parts get reproduced when an owner can't find what they need and takes on the challenge
Good luck with your choices
4
1969 Mustang / Re: 69 Grande stripe
« Last post by KevinK on Today at 12:56:45 PM »I have been watching Grande's for years. Most end up painting them on. Two things I have noted:
- The insert stripe gets wider at the rear quarter panel. This is often missed when painting them on.
-The overall strip width also increases going from front to back.
- There is a cut out around the door handle. I have not noticed this until recent years so my data is limited and needs to be verified.
NOS Strip kits show up now and then. Probably a lot of them are not reinstalled after painting.
- The insert stripe gets wider at the rear quarter panel. This is often missed when painting them on.
-The overall strip width also increases going from front to back.
- There is a cut out around the door handle. I have not noticed this until recent years so my data is limited and needs to be verified.
NOS Strip kits show up now and then. Probably a lot of them are not reinstalled after painting.
5
1964 1/2 - 1965 / Re: 65 Standard Instrument Cluster Finish
« Last post by Corey Bowcutt on Today at 12:40:34 PM »I know this is an old thread but I am restoring a 1964.5 Convertible that is for the most part unmolested. I just took out and disassembled the instrument cluster. It would be very shocking if this were not the original equipment. FWIW there is no marking on the bezel that I can see at all.
Corey
Corey
6
1969 Mustang / Re: 69 Grande stripe
« Last post by Eragon on Today at 11:55:54 AM »Hi all.
Finally i bought the Stripes which most of the cars on the pictures seema to have: black with gold accent. Another reason was that i did Not find a company which sells black with white accent.
Now I mounted the stripes on my pony and what did I find? At the inner Side of the passenger door there is a small rest of the original Stripes... Black with white accent.... So I will continue to search the correct one for my car...
Finally i bought the Stripes which most of the cars on the pictures seema to have: black with gold accent. Another reason was that i did Not find a company which sells black with white accent.
Now I mounted the stripes on my pony and what did I find? At the inner Side of the passenger door there is a small rest of the original Stripes... Black with white accent...
. So I will continue to search the correct one for my car... 7
1967 Mustang / Re: 1967 Fastback 289 2V Engine Mounts
« Last post by RoyceP on Today at 11:42:28 AM »Thank you Royce,
But If I want to buy frame side mounts they are listed as fitting as 1965 to 1970 mustang. Does that mean that those aftermarket frame side kits are the same for the '68 as you point out? That's my question.
It appears that there are several different versions of "factory" parts for this period. I don't just want to assume that the aftermarket suppliers settled on the one variant that fits all of those models in-between. I am hoping to get a confirmation of that assumption.
RP
I don't know what you would get. I would just buy factory 1968 parts. Reproduction stuff usually doesn't fit or work right. [/quote]
8
1967 Mustang / Re: 1967 Fastback 289 2V Engine Mounts
« Last post by Bob Gaines on Today at 10:23:07 AM »Thank you Royce,I have not used the repro frame mounts but expect them to be deficient in some way or the other. I would buy 68-70 used if it were me. OEM parts will fit better for sure. Yes the aftermarket suppliers settled on the one variant that fits all of those models in-between.
But If I want to buy frame side mounts they are listed as fitting as 1965 to 1970 mustang. Does that mean that those aftermarket frame side kits are the same for the '68 as you point out? That's my question.
It appears that there are several different versions of "factory" parts for this period. I don't just want to assume that the aftermarket suppliers settled on the one variant that fits all of those models in-between. I am hoping to get a confirmation of that assumption.
RP
9
1970 Mustang / Re: 70 428CJ Question about emissions sticker
« Last post by specialed on Today at 09:45:02 AM »Thats 2 70 mustang cj long time experts talking there. Lots of running changes in the rare 70 model year and a much different car than the more common 69 model. There are 4 different 70 mustang owners manuals compared to 2 69 owners manuals yet 5 times more 69 cars than 70 models. Welcome to the CMF forum bruce so now i dont have to worry about calling to early getting u out of bed with the western time zone changes. It was always fun going to the AZ rustfree junkyards with you back in the good ole days before the big scrap metal crush. Hidden Valley and desert valley yards were the biggest and best junk yards ever and u could spend all day there looking for parts back in the 80s and 90s anyway.
10
1967 Mustang / Re: 1967 Fastback 289 2V Engine Mounts
« Last post by RickP330 on Today at 08:06:17 AM »Thank you Royce,
But If I want to buy frame side mounts they are listed as fitting as 1965 to 1970 mustang. Does that mean that those aftermarket frame side kits are the same for the '68 as you point out? That's my question.
It appears that there are several different versions of "factory" parts for this period. I don't just want to assume that the aftermarket suppliers settled on the one variant that fits all of those models in-between. I am hoping to get a confirmation of that assumption.
RP
But If I want to buy frame side mounts they are listed as fitting as 1965 to 1970 mustang. Does that mean that those aftermarket frame side kits are the same for the '68 as you point out? That's my question.
It appears that there are several different versions of "factory" parts for this period. I don't just want to assume that the aftermarket suppliers settled on the one variant that fits all of those models in-between. I am hoping to get a confirmation of that assumption.
RP