ConcoursMustang Forums
Marketplace => Services Offered => Topic started by: Morsel on June 26, 2018, 09:06:42 PM
-
So I just got my license plate restored with the help of this guy Maksim Geyman (ich19liebe@yahoo.com). I found him on ebay looking at restored lights. The great thing I liked about him is he's been doing these for a while now and collecting parts and has a ton of original parts and OE bulbs and anything needed for these lights, then asks you what you want, OE cloth or repro or whatever needs to be used to cut down on cost if needed, whatever, he's very flexible, but prefers to do OE restorations. He has all years available or can restore yours for a very reasonable fee.
Anyway, great to work with and super nice and trusting guy. I mean the guy shipped me the light before I even paid him for his services, haha.
Jason
-
JASON.
Thanks for the heads up. I got one restored by a guy of ebay in 2016, but i was far from impressed with his final item. nothing about the final product was 100% correct im my opinion. bright and shiny and not like the advertised product by pictures in previous correspodance.
wont be going back there again!!!
regards
PHILL BERESFORD
MELBOURNE.
AUSTRALIA.
-
JASON.
Thanks for the heads up. I got one restored by a guy of ebay in 2016, but i was far from impressed with his final item. nothing about the final product was 100% correct im my opinion. bright and shiny and not like the advertised product by pictures in previous correspodance.
wont be going back there again!!!
regards
PHILL BERESFORD
Yes, this guy is totally into it and really wants to make you happy with the end result. Highly recommend...
Jason
MELBOURNE.
AUSTRALIA.
-
Pics, pics, pics. Please ;D
-
Oh, I got a few just about ready to install, mostly 65.
PM if interested.
Jim
-
Pics, pics, pics. Please ;D
Look at my post under members restoration/builds, I started with me leaf springs but then showed the license plate light... take a peek, came out great. I did the final rivets and assembly, but he did most of the work :0
Jason
-
Oh, I got a few just about ready to install, mostly 65.
PM if interested.
Jim
Wow, now that's a box, haha...
Jason
-
that light looks great !
If I may ask, what did it cost for this? I have 2 I need done.
John
-
Those lights, along with other items, were gold zinc plate as a "lot", eg a "lot" charge applied. (My plater is car friendly, his father had a 67 hardtop.) My normal lot size is about 75 items of different sizes, so an individual piece charge is difficult. As there are about 6 items that comprise the assembly, that make pricing more complicated. I also bead blast, replace the insulation sleeve, and install new rivets. The date on my original pictures is over ten years ago, and I haven't sent a gold zinc project in a while.
Jim
-
Those lights, along with other items, were gold zinc plate as a "lot", eg a "lot" charge applied. (My plater is car friendly, his father had a 67 hardtop.) My normal lot size is about 75 items of different sizes, so an individual piece charge is difficult. As there are about 6 items that comprise the assembly, that make pricing more complicated. I also bead blast, replace the insulation sleeve, and install new rivets. The date on my original pictures is over ten years ago, and I haven't sent a gold zinc project in a while.
Jim
Jim,I am curious how much time do you think you have invested in one complete restoration of a license plate light from start (Initial cleaning and disassembly) not including the plating service to finish putting in a bulb and testing? Also guesstimate time to round up all of the other extras needed like sheath,wire gaskets etc. I already know I am slow but I wanted to get a sense of others experiences.
-
Jim,I am curious how much time do you think you have invested in one complete restoration of a license plate light from start (Initial cleaning and disassembly) not including the plating service to finish putting in a bulb and testing? Also guesstimate time to round up all of the other extras needed like sheath,wire gaskets etc. I already know I am slow but I wanted to get a sense of others experiences.
"Does Macy's tell Gimbel's?"
Look for a pm.
Jim
-
If they did would it be a miracle?
-
Here's an odd date stamping. It's "bG", lower case "b", upper case "G". One instance is an oddity, two are a trend. I interpret that as "6G", and assume the number "6" was wearing out and, as the end of the production year was near, the letter "b" was used as a "6".
Stamping on license plate lights was not totally consistent. Most are on the frame in the location where the "bG" is located, some are on the opposite side, some are a single letter, and some are missing (I can't show you those, they're "missing"). Each assembly had the appropriate Ford logo, SAE markings and correct wire.
Jim
-
"Does Macy's tell Gimbel's?"
Look for a pm.
Jim
Jim,you misinterpreted my message. I'm not looking for costs or spelling out processes . I was looking for time spent to give others a idea of work involved when considering a price someone may charge to do it so that they can consider if a charge is high or low. Disregarding the material costs associated some people for instance may think that this license plate light restoration is a hour long project from start to finish. It's far more then that . Bob
-
In discussions with, and with the urging of Bob, I created a write up on License Plate Light Restoration. It's in the library.
Jim
-
that light looks great !
If I may ask, what did it cost for this? I have 2 I need done.
John
I sent him my light already with the rivets drilled out and glass beed blasted the housing so it was pretty much just ready for plating. My other parts of the light were in good shape except the cloth and the replacement bulb, which he replaced with an OE bulb. I did the final rivets once I received it, but I think he's going to start doing that as well now since I got him all the numbers and items he needed to purchase the right squeeze press and dies. I paid $75 after all that which was a pretty good deal to me based on what this would have costed to do a single plating job for it... but I know he changers for how much work he has to do based on the light and what you want done...
-
very good, thanks for the information.
I`ll be in contact with him
John