« previous next »
Pages: [1]   Go Down

Author Topic: 1967 GT500 fan  (Read 1152 times)

Offline Boss/Cyclone

  • Newbie
  • *
  • Posts: 25
1967 GT500 fan
« on: September 21, 2020, 08:03:58 PM »
I have a 67 GT500.   Recently the clutch fan started wearing out, so I pulled it.   When I did I noticed it has C7SE-A stamped on the side of the base.   The blades are C6OE-F.  I have been told this is not the correct clutch.  Anyone know for sure?   I bought my GT500 in 1987 so it was 20 years old and obviously had some maintenance done, but appears mostly original.   Also, what is the correct color for the blades?   It currently has a blue center with black blades which I doubt is correct.
Logged
1967 GT500#2100 4speed, inboards  67400F9A02100
1966 Mustang GT fastback, A code, 4 speed, pony interior
1969 Mustang GT convertible H code, acapulco blue

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9001
Re: 1967 GT500 fan
« Reply #1 on: September 21, 2020, 09:02:17 PM »
Quote from: Boss/Cyclone on September 21, 2020, 08:03:58 PM
I have a 67 GT500.   Recently the clutch fan started wearing out, so I pulled it.   When I did I noticed it has C7SE-A stamped on the side of the base.   The blades are C6OE-F.  I have been told this is not the correct clutch.  Anyone know for sure?   I bought my GT500 in 1987 so it was 20 years old and obviously had some maintenance done, but appears mostly original.   Also, what is the correct color for the blades?   It currently has a blue center with black blades which I doubt is correct.
C60E-F is the correct fan for your 67 GT500. From the factory it was completly semigloss black . A past owner apparently added their artistic license when painting it with a blue center . ;) The C7ZX-A is the factory correct fan clutch for the 67 GT500. The C7SE-A is a viable service replacement however it puts the fan slightly closer to the radiator fins . The C7ZX-A was only serviced for a very short period of time. Fortunately if you so choose to replace it there is a very exact replacement available from http://www.brownsautobodyservices.com/  .
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Boss/Cyclone

  • Newbie
  • *
  • Posts: 25
Re: 1967 GT500 fan
« Reply #2 on: September 21, 2020, 09:14:42 PM »
Thank you for your quick answer.   I ordered that new clutch.   Last question on this, which of these has the correct attaching bolts for the fan to the clutch?
Logged
1967 GT500#2100 4speed, inboards  67400F9A02100
1966 Mustang GT fastback, A code, 4 speed, pony interior
1969 Mustang GT convertible H code, acapulco blue

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9001
Re: 1967 GT500 fan
« Reply #3 on: September 21, 2020, 09:26:19 PM »
Quote from: Boss/Cyclone on September 21, 2020, 09:14:42 PM
Thank you for your quick answer.   I ordered that new clutch.   Last question on this, which of these has the correct attaching bolts for the fan to the clutch?
The first top picture. AMK sells a attachment kit. NPD carries it too.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Boss/Cyclone

  • Newbie
  • *
  • Posts: 25
Re: 1967 GT500 fan
« Reply #4 on: September 21, 2020, 09:33:19 PM »
Thanks again Bob.
Logged
1967 GT500#2100 4speed, inboards  67400F9A02100
1966 Mustang GT fastback, A code, 4 speed, pony interior
1969 Mustang GT convertible H code, acapulco blue
Pages: [1]   Go Up
« previous next »