ConcoursMustang Forums

Restoring - General discussions that span across many different groups of years and models => Interior & Trunk => Topic started by: HomerJay on February 12, 2015, 01:40:50 PM

Title: How to remove the deluxe seat backs on a 67
Post by: HomerJay on February 12, 2015, 01:40:50 PM

Hi folks,

dont want to destroy my deluxe seatcovers, so how to uninstall die deluxe plastic covers on the backside of the frontseats?

Thanks a lot!  :)

Title: Re: How to remove the deluxe seat backs on a 67
Post by: 67gtasanjose on February 12, 2015, 03:05:59 PM

The INSIDE hinge cover portion/area screw is tough to get at with the seats installed, but if you can get it out somehow, take the outside hinge cover screw out also, then take the two along the back near the bottom out, carefully flex the seat back cover slightly away from the seat frame hinge are and swing it rearwards an inch or two. Now lift the seat back straight up to slide the top holders, out of their brackets. Once you see the upper tangs clear the bracket that is screwed to the seatback at the top (that they slide into) it is off. Pictures might help but I do not have any handy right now.

Richard

Title: Re: How to remove the deluxe seat backs on a 67
Post by: HomerJay on February 12, 2015, 03:55:22 PM

Ok, guess i know how it works. thanks a lot for your help.