ConcoursMustang Forums
Restoring - General discussions that span across many different groups of years and models => Interior & Trunk => Topic started by: drummingrocks on May 02, 2010, 02:49:16 PM
-
I'm finishing up the interior restoration on my '66 fastback, and I have a few questions about duplicating the original finish on the interior paint. I've seen a LOT of variations over the years, and it seems that a lot of people end up with interiors that are too dull or too shiny. I'd like to avoid this. I've seen the paints offered by NPD and other Mustang retailers. I'm kind of hesitant about trying to spray the larger panels on a fastback with a spray can, but is this the best way to go? Has anyone used these spray-can paints with any type of success? Again, I just want the most correct looking paint possible.
-
If you are talking original '66 interior paint...It would be Charcoal "Irid" Black.
It looks like sort of like a semi-flat metallic Black. It is definately more flat than glossy and is still sold in laquer cans from NPD and California Mustang. Most Ford and Mustang Parts vendors carry it in a laquer spray bomb. That is the correct one for re-spraying a door lets say to match the rest of the interior. The big problem is...that the original black was really not that attractive if you can believe it when compared to other blacks..kind of yucky looking if you ask me. (My personal opinion)... Hence the beginning flood of resto colors...Many shades of different blacks that you now see today at car shows. The original Krylon 1613 has far proven itself to be the best overal spray bomb....or I should say...The best looking...and best wearing. A problem is that Valspar (The maker of Krylon) discontiued the original laquer based formula (for over 30 years) for a new Enamel based formula (Greenpeace crazies) which is like poo when compared to the old stuff. You can still get the original Krylon 1613 at Graingers online though. It sells for like 5 bucks a can. The original black was never glossy, yet it was metallic when you looked at it in the light or sunshine...and I hate seeing a "Gloss black dash" at shows.. It really looks wrong. It all depends where you want to go and how far that you want to take it... You could have a body shop mix it up and spray it for you...which is an excellent route...but you'd probably have to gut your interior to do so..
-
Charcoal black was first introduced in Mustangs for the '67 model year.
The correct black for 65-66 is a non-metallic semi-gloss (more to the flat side).
-
While not completely concours correct, the SEMS Landau Black is a reasonably close match to the original. If you're completely re-doing the entire interior (doors, dash, panels, etc.) this may be a good way to go. SEMS is very easy to apply and touch-up. With the entire interior done this way, you may be able to fool a judge or two or three...
-
Charcoal black was first introduced in Mustangs for the '67 model year.
The correct black for 65-66 is a non-metallic semi-gloss (more to the flat side).
Just to be sure: So the right black for a 67 interior is charcoal black metallic, right?
-
Just to be sure: So the right black for a 67 interior is charcoal black metallic, right?
Yessir
-
Alright, thanks!
-
Non-Metallic Black used in '64-'66?? That's news to me.. I always thought that the Black interior color was the same '64-'70.. Learned somthing new...!!! Good to know. That actually makes me feel better knowing that I used non-metallic Black to re-paint my interior..lol.. It was a better match than I thought.... ;)
I'll have to take a closer look at my '66 Hardtop interior. It has an original Factory Black painted interior. My buddy owns it now.. Sold it to him two years ago...He lives around the corner..
Tony K.
-
You can go to your local PPG Jober and get sb12 which is the vinyl reformatulation of the laquer that was original used. Your Local ppg jober should be able to sell you 4 oz and then repackage it in a 16oz spray bomb for you to used should cost around 15 bucks or so.
-
You can go to your local PPG Jober and get sb12 which is the vinyl reformatulation of the laquer that was original used. Your Local ppg jober should be able to sell you 4 oz and then repackage it in a 16oz spray bomb for you to used should cost around 15 bucks or so.
Of course this would depend on where you live the the local restrictions ;)
-
Well, I've had everything painted for a week now. The paint turned out really nice, but it's fairly thin. One the one side, the thinness is great for grained parts like the doors, as you're less likely to fill in the grain. However, it takes several coats to get good coverage on larger parts. All said and done, I used five cans. I'm kind of concerned about how well it will hold up over the long run, but as this car is a very occasional driver, it should be fine.