ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1966 Shelby => Topic started by: ChrisV289 on August 27, 2015, 02:39:00 PM
-
So my dad is going back to using an Autolite 4100 on his Hertz Shelby automatic. Right now he has a Demon carb on there with a Paxton supercharger. I am providing him with a regular Autolite 4100 that a guy in Cali is going to rebuild into a hi-po carb. . I assume he is supposed to have a manual choke on the carb, is that correct?
-
So my dad is going back to using an Autolite 4100 on his Hertz Shelby automatic. Right now he has a Demon carb on there with a Paxton supercharger. I am providing him with a regular Autolite 4100 that a guy in Cali is going to rebuild into a hi-po carb. . I assume he is supposed to have a manual choke on the carb, is that correct?
Yes the hipo carbs used a manual choke. The automatic GT350's typically used the hipo Mustang carb.
-
To illustrate
Top picture is more correct :) - lower one is prettier ::) restored
(http://www.concoursmustang.com/forum/gallery/4/6-270815151647.jpeg)
(http://www.concoursmustang.com/forum/gallery/4/6-270815151538.jpeg)
-
Thanks Bob and Jeff. I will let my dad know and be on the look out for a manual choke setup, he has the cable still.
-
I can't tell from the pic but would Shelby's still have a dash pot on the automatic Hertz cars?
-
I can't tell from the pic but would Shelby's still have a dash pot on the automatic Hertz cars?
Here is an old picture of a Hertz in 66 that I believe you can make out the dashpot and bracket on
Believe it is from the same or close to the same time period as the one your working on
(http://www.concoursmustang.com/forum/gallery/4/6-121215165001.jpeg)
-
To illustrate
Top picture is more correct :) - lower one is prettier ::) restored
(http://www.concoursmustang.com/forum/gallery/4/6-270815151647.jpeg)
(http://www.concoursmustang.com/forum/gallery/4/6-270815151538.jpeg)
I was wondering if the top carb in the pictured is a true HiPo carb? It doesn't appear to have the correct choke lever stop.
-
My bad I see the stop on both carbs.
-
Dashpot is actually "peeking out" over the front bowl in Jeff's top picture. Take a look....
-
Dashpot is actually "peeking out" over the front bowl in Jeff's top picture. Take a look....
Think that is likely what generated the follow up question ;)
-
Is this an aftermarket choke cable on 1502?
-
Is this an aftermarket choke cable on 1502?
I don't know about after market but it not a typical 65 or 66 choke cable. It is not even like the 67 version although the knob looks like the 67 one.
-
Is this an aftermarket choke cable on 1502?
No but its off another Ford product