ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Mustang => Topic started by: preaction on January 18, 2016, 07:59:10 PM

Title: 67 390 distributor primary wire
Post by: preaction on January 18, 2016, 07:59:10 PM

Is this wire reproduced, IIRC Bob Gains says it should have a ring connector at the coil end.

Title: Re: 67 390 distributor primary wire
Post by: J_Speegle on January 18, 2016, 10:05:24 PM

For a S code? 

What dist are you using?

So far I'm seeing and recall the 90 degree for that application with the typical BB white boot.

Let me know and I'll dig further

Title: Re: 67 390 distributor primary wire
Post by: Bob Gaines on January 18, 2016, 11:23:39 PM

Quote from: preaction on January 18, 2016, 07:59:10 PM

Is this wire reproduced, IIRC Bob Gains says it should have a ring connector at the coil end.

That wire is reproduced and is available at Mansfield and I think NPD. It is a ring connector on the 67 BB and SB duel point centrifugal advance for sure. Not so sure on 67 Vacuum advance.   

Title: Re: 67 390 distributor primary wire
Post by: preaction on January 19, 2016, 11:44:51 AM

The distributor is C7OF-F, for a 390 GT. There is no listing for a 390 at NPD.http://mansfieldmustang.com/06-68.jpg   Mansfield does carry this for 67-70 390GT and 428 CJ.

Title: Re: 67 390 distributor primary wire
Post by: 196667Bob on January 19, 2016, 01:29:35 PM

Bob : To answer your question on the SB with vacuum advance, no, they do not use the ring connector to the coil, but the push on 90 degree connector (see my Post of December 21 under "Parts" for documentation).

Bob

Title: Re: 67 390 distributor primary wire
Post by: J_Speegle on January 19, 2016, 02:34:26 PM

Quote from: preaction on January 19, 2016, 11:44:51 AM

The distributor is C7OF-F, for a 390 GT. ........

(http://www.concoursmustang.com/forum/gallery/5/6-190116123324.jpeg)


(http://www.concoursmustang.com/forum/gallery/5/6-190116123347.jpeg)

Title: Re: 67 390 distributor primary wire
Post by: preaction on January 19, 2016, 02:52:36 PM

Thanks Jeff.