ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Shelby => Topic started by: Brian in PA on March 17, 2016, 09:33:05 PM

Title: 67 throttle linkage
Post by: Brian in PA on March 17, 2016, 09:33:05 PM

Hi guys I was wondering if anyone has some pics of a 67 gt 350 with Holley 715 lemans carb linkage and return spring?  Thanks!

Title: Re: 67 throttle linkage
Post by: J_Speegle on March 17, 2016, 11:55:31 PM

Sorry nothing very clear and complete. Too many air cleaners in the way :(

Set up is very simple pretty much like 66 Shelby as well as 66-67 Mustang

Title: Re: 67 throttle linkage
Post by: Brian in PA on March 18, 2016, 07:02:38 PM

Thanks Jeff.

Title: Re: 67 throttle linkage
Post by: Bossbill on March 28, 2021, 02:32:38 PM

Jeff did have a pic of the carb on the throttle return spring side referenced here:
http://www.concoursmustang.com/forum/index.php?topic=17909.msg113204#msg113204

with a closeup of the area (and of Jeff's pic) in question in my first pic attachment.

The second attachment shows the parts used on the 4V and it's inferred in the above comments that the 9741 is used in the GT350 as well as using the 9737 spring.
Is that correct?

For extra credit, what is the correct finish for the 9A702 accelerator rod? I believe it's just zinc (not shiny).

Title: Re: 67 throttle linkage
Post by: Bossbill on March 29, 2021, 09:11:00 PM

Per a discussion on the SAAC site, it IS the 289 throttle rod, spring and bracket.
It appears as well that the rod finish is zinc.