ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1968 Mustang => Topic started by: mhubert89 on May 25, 2016, 07:43:32 PM
-
Hi ,
Trying to find somes parts to restore my rear axle 8" ! Where i can find all this parts and do you have parts number ? Like for seal 2 parts come out like 'wcy' , wich one i need ?
From this picture from my book .. I need
2 gasket, bearing, seal by side ! Just want to know where i can find all this stuff !! Look like CJ dont have everything for this ...
Thanks
-
google; NAPA. National Auto Parts Association. They have all your parts and their web site is user friendly. Your gaskets are FPG 4828,you need two, and FPG 55001 you need two. The axle seals are NOS 13700 you need two. The bearings are PGB PRW207CCRA you need two. Double check and get confirmations on the parts and numbers. DON'T JUST ASSUME I'AM CORRECT! I usually buggar up at least one of the axle seals so you might want to get a couple extra. Brian
-
Not sure where your located but agree with Brian - I would start at my local regular (as compared to the places where the kid behind the counter worked at Big 5 or Taco Bell last week ::) parts store.
-
google; NAPA. National Auto Parts Association. They have all your parts and their web site is user friendly. Your gaskets are FPG 4828,you need two, and FPG 55001 you need two. The axle seals are NOS 13700 you need two. The bearings are PGB PRW207CCRA you need two. Double check and get confirmationson for the parts and numbers. DON'T JUST ASSUME I'AM CORRECT! I usually buggar up at least one of the axle seals so you might want to get a couple extra. Brian
Awesome !! Thanks , very appreciate !
Math
-
Not sure where your located but agree with Brian - I would start at my local regular (as compared to the places where the kid behind the counter worked at Big 5 or Taco Bell last week ::) parts store.
Already did a couple store, in Canada its not easy like usa to find classic parts !