ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Mustang => Topic started by: socalgt on June 01, 2016, 12:07:21 AM

Title: 67 C4 automatic transmission gear shift lever replacement
Post by: socalgt on June 01, 2016, 12:07:21 AM

I need to replace the gear shift lever(that comes out of the transmission). ( The lever is broken off of the outer shaft)  I read an article indicating that with the pan off, leaving the valve body on, the nut can be loosened with a hammer and long punch, and the outer shaft removed, the nut held in place and a new outer shaft installed and secured with the nut.  Any one have any experience with this method?  Sounds good to me, as  opposed to removing the valve body.

Title: Re: 67 C4 automatic transmission gear shift lever replacement
Post by: socalgt on June 06, 2016, 07:50:31 PM

I will go ahead and answer my own question....no, the nut cannot be removed with the valve body installed...there was just no way.  After removing the valve body,  A 7/8" box wrench worked fine.