ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1966 Mustang => Topic started by: dbm350 on July 19, 2010, 12:42:05 AM

Title: kick panel screws
Post by: dbm350 on July 19, 2010, 12:42:05 AM

      Working on an April 66 San Hose car.   I need confirmation on number of screws in the kick panel and the location.  There are 3  screw holes in the area underneath the panels. I thought there were only supposed to be 2 at this time in production.   I have 1 hole the lower front corner, 1 hole about half way up from the floor and about 2 inches in from the door opening. And 1hole about 3/4 up from the floor and about 3-4 inches in from the door opening. Same on both sides. Any body else seen this?    Thanks Doug

Title: Re: kick panel screws
Post by: NEFaurora on July 19, 2010, 01:03:30 AM

Very early production '66's had the 3 screw Kick panels which were a '65 carryover.  Since it is a San Jose car, Jeff Speegle will probably respond since he is the San Jose expert, or you can PM him or e-mail him.

Tony K.

Title: Re: kick panel screws
Post by: J_Speegle on July 19, 2010, 07:37:04 PM

Hope this helps - what I'm seeing on a spring 66 San Jose cars

(http://www.concoursmustang.com/forum/gallery/13/6-160220010358.jpeg)

(http://www.concoursmustang.com/forum/gallery/13/6-160220010411.jpeg)

(http://www.concoursmustang.com/forum/gallery/13/6-160220010424.jpeg)

Title: Re: kick panel screws
Post by: dbm350 on July 19, 2010, 11:25:11 PM

  Thank you Tony and Jeff. Exactlywhat I needed to Know.   Doug