ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1969 Mustang => Topic started by: J_Speegle on May 01, 2018, 09:10:51 PM
-
Every so often a new detail appears out of a search to answer a forum or email question and over the last few days another has arisen.
This time it's related to the location of the hood electrical ground strap attached over the cowl cover of 69 Mustangs and Cougars on the passenger side. Though a small detail all of them working together breaks the cookie-cutter look of the finished cars and represents, how the cars were each built, our goal
Only included three pictures from each plant though I have dozens of additional example from each. Hope this helps
Metuchen
(http://www.concoursmustang.com/forum/gallery/10/6-010518193139.jpeg)
(http://www.concoursmustang.com/forum/gallery/10/6-010518184443.jpeg)
(http://www.concoursmustang.com/forum/gallery/10/6-010518184514.jpeg)
San Jose
(http://www.concoursmustang.com/forum/gallery/10/6-010518194312.jpeg)
(http://www.concoursmustang.com/forum/gallery/10/6-010518194359.jpeg)
(http://www.concoursmustang.com/forum/gallery/10/6-010518194423.jpeg)
Dearborn
(http://www.concoursmustang.com/forum/gallery/10/6-010518200744.jpeg)
(http://www.concoursmustang.com/forum/gallery/10/6-010518200729.jpeg)
(http://www.concoursmustang.com/forum/gallery/10/6-010518200644.jpeg)
Did find one example from the 9F156xxx period that didn't fall into the "typical" location for 69 Dearborn but wanted to include it though it was different from the all the others I found from that year and plant
(http://www.concoursmustang.com/forum/gallery/10/6-010518200712.jpeg)
-
So in summary the survey shows that all three locations (first three cowl cover screws on the passenger side) were used for mounting the hood ground but typically they differed from plant to plant that year.
#1 or furthest outboard at San Jose
#2 or middle location for NJ
#3 or closest to the windshield washer nozzle, typically, at Dearborn
Who would have thought :)
Sure we may hear from the handful of members that have unrestored 69 examples
-
Hi Jeff, interesting picture post, thanks
Questions:
Are these pics all 1969 cars, and is the mounting location/configuration different for 1970 Dearborn cars?
I noticed in the pics that the fasteners/screws holding down the cowl are hex head and not Phillips can you confirm what type of head screw was used on a Sept 69 built 1970 Dearborn mustang.
Do the 1970 mustangs have that round rubber seal attached to the length of the cowl lip??
-
All 69=70 cars should have cowl rubber seal. Agree jeff as i have 4 Met. cars in the area & they have ground straps on center screws not by washer jets like i see on dearborn cars. I am working on a early feb 69 Met. car now & am wondering about the color of the cowl body color vs. black as it seems like Met started paint cowls black way before dearborn. In your Met. ground strap photos all seem to be black color do u have the build dates on those photos? thanks
-
Questions:
Are these pics all 1969 cars, and is the mounting location/configuration different for 1970 Dearborn cars?
Yes all 69's since that is the subject of the thread.
It appears that Dearborn during 70 production continued to normally place the ground strap at the mounting screw closest to the passenger side windshield washer nozzle again
I noticed in the pics that the fasteners/screws holding down the cowl are hex head and not Phillips can you confirm what type of head screw was used on a Sept 69 built 1970 Dearborn mustang.
From 0F01F1086xx
(http://www.concoursmustang.com/forum/gallery/10/6-090518181139.jpeg)
Do the 1970 mustangs have that round rubber seal attached to the length of the cowl lip??
Yes that was the plan
-
Thanks again, confirmed screws are hex head and 70 production cars had round rubber seal.
-
I am working on a early feb 69 Met. car now & am wondering about the color of the cowl body color vs. black as it seems like Met started paint cowls black way before dearborn. In your Met. ground strap photos all seem to be black color do u have the build dates on those photos? thanks
My 11/26/68 Metuchen, NJ built 69 Coupe that still has original factory paint on the cowl top & side covers both are body color & the separation line is the cowl/firewall pinch weld. Below the pinch weld is engine compartment black, & above the pinch weld is body color.
-
My 11/26/68 Metuchen, NJ built 69 Coupe that still has original factory paint on the cowl top & side covers both are body color & the separation line is the cowl/firewall pinch weld. Below the pinch weld is engine compartment black, & above the pinch weld is body color.
Mike can I suggest that you repost this over in the other thread so that we can keep all the findings together :) Keeps me from having to merge your post and that thread and since Ed took the time to start a new thread specifically about the cowl finish just keeps it all together in a neater pile for search users in the future
Thanks
http://www.concoursmustang.com/forum/index.php?topic=2488.0 (http://www.concoursmustang.com/forum/index.php?topic=2488.0)