ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1964 1/2 - 1965 => Topic started by: must69 on May 11, 2018, 05:31:11 AM
-
I do not seem to be able to find a source for a Generator Belt for a 260 engine. Looking for one with "OE" stamping.
Thanks.
Phil
-
Guess you'l be looking for a good used or NOS version if your looking for one with the engineering numbers into the belt itself like originals
Guess might start with a wanted here and where ever the Falcon owners hang out.
Knowing the identification numbers will go a long way since some with only have the belt with no original tags or sleeves for the part number to be found
Good luck
-
I would like to know the engineering numbers and where you find one as well (for my June built 64 1/2). I was only lucky enough to find a Gates replacement locally. :)
-
(NPD) National Parts Depot or www.martiautoworks.com
Either one have it in Repro...
:o)
Tony K.
-
I have searched Marti's site under 1964 Mustang and it only lists the 240 I6 and a 352 V8 (even though I picked Mustang). I switched to 1965 Mustang and it only shows a match for an alternator belt?
-
You have to call Marti's directly and just ask about it. They'll have the numbers in their books to reference. I ran into this same issue with the smog pump to A/C compressor and he (believe his name is Eric?) custom made and printed the correct numbers on them. I ordered two so I would have an extra one.
-
Nice... Thanks!