ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1966 Mustang => Topic started by: geo302b on November 19, 2018, 01:00:27 PM
-
Putting new floor (1pc need measurement from top of rocker lip to floor pan not lip. have no firewall, torque boxes to go by, all gone. be very thankfull THANKS (LATER)
-
OK, what year, model, plant, etc, are you working on? It is important.
Jim
-
This is for a friend all i know its a 66 fastback i give him measurements off my Dearborn CJ and Dearborn BOSS 302 but he would like to know if different. thank you
-
I have this if it helps.
It's more frame than floor but might be helpful.
Chris
(http://www.concoursmustang.com/forum/gallery/11/2850-191118172851.jpeg)
-
Here's a 66 fastback, Dearborn car with original floors.
It may not be the same as your friend's car since he gave you absolutely the minimum amount of information.
(http://www.concoursmustang.com/forum/gallery/11/4249-191118184715.jpeg)
The dimension is the same in the front and the rear.
Goofy things going on in posting and attachment-land today...
-
Thanks that works same as i got on my cars
-
Chris were did you get that and do they have one for a 69? Thanks
-
This is for a friend all i know its a 66 fastback i give him measurements off my Dearborn CJ and Dearborn BOSS 302 but he would like to know if different. thank you
Look in this Site's Library. Some measurements are there also.
-
Chris were did you get that and do they have one for a 69? Thanks
As suggested by Richard in the post above - check the Library here on the site. Currently we have the 67-up ones listed
-
As suggested by Richard in the post above - check the Library here on the site. Currently we have the 67-up ones listed
... and now you have the 64 to 66
Chris
-
... and now you have the 64 to 66
Yes and thanks Chris . Exactly what I thought when I saw your post :) Thanks for providing a fairly large copy of it