ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Mustang => Topic started by: Z67Fback on July 12, 2020, 07:26:33 PM
-
I am trying to determine the correct locations of mounting hardware of the the fuel and brake line. Specifically for a later 67 with the 2 piece fuel line, routed through the frame rail by the drivers seat, the brake line line is going under the steering column. I dont see the correct mounting locations for the brake line in the tunnel. Any and all pictures would be greatly appreciated- Thank you!
-
I did find a good thread- which may have answered some questions on the fuel line.
http://www.concoursmustang.com/forum/index.php?topic=22685.msg142137#msg142137
Still looking for pictures on locations for mounting hardware for brake line in tunnel
-
Brake lines at the drivers side firewall/steering column area is shown in another running change thread
http://www.concoursmustang.com/forum/index.php?topic=20967.msg131858#msg131858 (http://www.concoursmustang.com/forum/index.php?topic=20967.msg131858#msg131858)
-
Reusing the lower drivers side firewall picture from the other thread going rearward to the rear brake flex line.
(http://www.concoursmustang.com/forum/gallery/12/6-030919174022.jpeg)
(http://www.concoursmustang.com/forum/gallery/14/6-120720195506.jpeg)
(http://www.concoursmustang.com/forum/gallery/14/6-120720195532.jpeg)
(http://www.concoursmustang.com/forum/gallery/14/6-120720200059.jpeg)
(http://www.concoursmustang.com/forum/gallery/14/6-120720195557.jpeg)
Sometimes that rear bend at the rear edge of the floor board and tunnel will head up and across the face of the rear inner seat belt anchor with a slight S turn/bend
Hope this helps
-
Thank You . Perfect