ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1964 1/2 - 1965 => Topic started by: midnite cruiser on August 31, 2020, 03:16:49 PM

Title: 64.5 wire clip under scuff plate (door sill)
Post by: midnite cruiser on August 31, 2020, 03:16:49 PM

July 64 car had 8 of these holding the wire runs under the scuff plates.
Most are cracked/missing. No luck finding P/N in the Osborn manuals.
Ribbed plug end same size as wire loop style under hood.
Is this reproduced?

Title: Re: 64.5 wire clip under scuff plate (door sill)
Post by: jwc66k on August 31, 2020, 04:40:04 PM

The clip is shown in the 64 Electrical Assembly Manual (AM003 pg 18) as 377864-S. There are two uses for the clip, the door sill on the left for all cars, the door sill on the right for convertibles.
A different clip was used in 65 (379862-S), tape was used in 66.
All three applications are shown in the library in "Mustang Hardware Spreadsheets, 64-66".
It is not reproduced.
Jim

Title: Re: 64.5 wire clip under scuff plate (door sill)
Post by: midnite cruiser on August 31, 2020, 05:40:26 PM

Thank you. I do see the numbers in the spreadsheet.
I will use some loop style wire holders so the holes are plugged then tape as needed.