ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1964 1/2 - 1965 => Topic started by: sanluis09 on December 07, 2020, 04:47:26 PM
-
Hi, I want to confirm the head markings of the original headlight extension bolts for a 65... the ones of my car have letters “RBW” letters inside a small circle, then surrounded by two more circles.
But on AMK catalogue, the head marking replicated on these particular bolts is “SEMS” not RBW.... 🧐... is there any differences between manufacturing plants or date period?
Please see pics of the bolts I’m referring which are being installed on the attached pic and other pic of the bolts that AMK has.
Thank you
-
AMK carries only a limited number of head marking of any type screw/bolt. It is my understanding that all the AMK hardware is new. The reason is simple, many of the original suppliers are no longer in business. I have at least a half dozen different head markings for 372289-S2 in my stock. They are all -S2 finish (phosphate and oil).
Jim
-
I believe both my cars are RBW and are San Jose built
-
Think you have a real challenge given when and where your car was assembled.
Not sure how much was assembled at Dearborn and how much was left undone so that the cars could be claimed as "built in Mexico" was done in country and what had to be sourced (hardware???) in the country also.
Looked through my collection and I don't have any Mexican built examples disassembled enough to see the bolt heads and even though they likely don't apply don't have any Dearborn to offer for this detail. Positive thing, well looking for something positive to add :) they won't be seen on the completed car though you will know
-
Look in the library section of this Forum under topic "Bolt Head Marking Tables". These are copies from the "AMK Guide TO Ford Fasteners" that Max, at AMK has found. He gave up permission to use his pages.
Jim