ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Mustang => Topic started by: orgnl70 on November 19, 2021, 09:28:30 PM

Title: 67 Hard Fuel Line Connection
Post by: orgnl70 on November 19, 2021, 09:28:30 PM

67 S Code. Holly Model 4150 4V Carb.
The hard fuel line from the fuel pump to the carb. stops short about an inch from the carb. inlet.  The end of the fuel line is raised. It looks as though a rubber hose is to be used. The carb. has a female thread.
Any suggestions? A picture would be helpful.
Thanks in advance

Title: Re: 67 Hard Fuel Line Connection
Post by: carlite65 on November 19, 2021, 10:04:14 PM

filter?

Title: Re: 67 Hard Fuel Line Connection
Post by: J_Speegle on November 20, 2021, 12:39:42 AM

Quote from: orgnl70 on November 19, 2021, 09:28:30 PM

Any suggestions? A picture would be helpful.

Guess you missed or didn't check the Unrestored Picture Section of the site. Some forget that resource is there.

Check the S code fastback and picture posted as EC-2. Looks like aftermarket clamps but you will see the carb, and fuel line connection. With the filter

Title: Re: 67 Hard Fuel Line Connection
Post by: Bob Gaines on November 20, 2021, 12:40:01 AM

Quote from: carlite65 on November 19, 2021, 10:04:14 PM

filter?

Correct. It needs a screw on Holley fuel filter. picture is of service replacement sold by NPD for 10.00.The assemblyline version is a little shorter very rare and expensive when you find one