ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Mustang => Topic started by: rcgt350 on January 21, 2022, 12:03:09 AM

Title: 67 Deluxe Seat Panel Screws?
Post by: rcgt350 on January 21, 2022, 12:03:09 AM

For 67 Deluxe bucket seats, Id like to determine if the screws that hold the rear panel( 2 rear) and one on each side near hinge point plus the ones that attach the lower side trim panel are all Chrome finish phillips bevel head?
It looks like the MPC calls for 52422-S which AMK shows as 10-16 5/8".  The two rear panel screws calls for 2)52513-S
Can anyone comment ?

Title: Re: 67 Deluxe Seat Panel Screws?
Post by: 196667Bob on January 21, 2022, 02:00:06 PM

Attached is a copy from the 1967 Interior Assembly Manual. Pick out and write down the Part Number of the screws you need.
Then go to Jim's 1967-68 Hardware Listing in the Library. There are two listings ; one by application, and the other by Hardware Part Number. Pick the one by Hardware Part Number, and fine the matching numbers to what you wrote down. Jim's listing will give you the type of head, size, length, finish and quantity.

Hope this helps.

Bob