ConcoursMustang Forums
Marketplace => Wanted Ads => Topic started by: Anghelrestorations on February 03, 2023, 01:00:52 AM
-
Looking for an NOS fuel filler neck for a 65 Mustang. Should be the same for 65 and 66 with a part number of C5ZZ-9034-B.
Also looking for one for a 68 Mustang - should be a C8ZZ-9034-A.
If anyone has one to sell let me know.
Marcus
marcus@anghelrestorations.com
602 628 2522
-
Looking for an NOS fuel filler neck for a 65 Mustang. Should be the same for 65 and 66 with a part number of C5ZZ-9034-B.
Also looking for one for a 68 Mustang - should be a C8ZZ-9034-A.
If anyone has one to sell let me know.
Marcus
marcus@anghelrestorations.com
602 628 2522
Be careful on the 65/66 necks because later service replacements were a slightly different shape compared to the assemblyline. The assemblyline version has a small crook in the neck that the service replacement and repros eliminated.
-
Yep....thanks Bob. I have both used versions here of the 65/66 filler neck. If I had a good way to get the tin lead redone on these I could just get the assembly line version refinished but have never found anyone that messes with that type of plating.
-
I have had very good results tumbling filler necks to renew the finish using very wet and small media.
-
I had Wilson Productions refinish mine: http://www.n96airgrabber.com/fillertube.htm
Other reference information including a how to from the library:
https://www.concoursmustang.com/forum/index.php?topic=22192.0
https://concoursmustang.com/speegle/Articles/Article_Tinning.pdf
-
Ok thanks for the links....and yes, I already tried tumbling and it did not come out the way I wanted. Didnt look right afterwards.
-
I was very pleased with the results from Wilson. I've seen 10 or so in person, all very nice. Have recommended him for several years, no complaints.