ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1968 Mustang => Topic started by: bullitt68 on October 25, 2023, 05:07:38 PM
-
Trying to determine what I should be using for the Waterpump Bypass Hose. See this from Dead Nuts On
(https://www.concoursmustang.com/forum/gallery/19/4775-251023163114-196171841.png)
-
Trying to determine what I should be using for the Waterpump Bypass Hose. See this from Dead Nuts On
(https://www.concoursmustang.com/forum/gallery/19/4775-251023163114-196171841.png)
The picture is of the metal tube that is pressed into the pump and into the intake. Ford used a special reinforced rubber hose to go between the metal nipple in the intake and the one coming out of the water pump. most people use a piece of heater hose but it is thicker wall and has a tendency to balloon out . I would check with jacks as I think he was selling a short reinforced hose alternative.
-
The picture is of the metal tube that is pressed into the pump and into the intake. Ford used a special reinforced rubber hose to go between the metal nipple in the intake and the one coming out of the water pump. most people use a piece of heater hose but it is thicker wall and has a tendency to balloon out . I would check with jacks as I think he was selling a short reinforced hose alternative.
Great thanks I sent him a message
-
The picture is of the metal tube that is pressed into the pump and into the intake. Ford used a special reinforced rubber hose to go between the metal nipple in the intake and the one coming out of the water pump. most people use a piece of heater hose but it is thicker wall and has a tendency to balloon out . I would check with jacks as I think he was selling a short reinforced hose alternative.
I have tried searching to find a photo of an original, but no luck so far
-
I have tried searching to find a photo of an original, but no luck so far
It is a slightly thinner wall (although reinforced)then regular heater hose . Some had ribs and some didn't. It is painted with the engine so markings are irrelevant . You could also try Mansfield Mustang .
-
part number C2OZ-8597-D
you might found some on eBay.
Laurent
-
https://www.ebay.com/itm/304651887245?epid=1511214444&hash=item46eeaae28d:g:oOgAAOSwxuBjPdBI&amdata=enc%3AAQAIAAAAwJ6ch2KCAMdu66bHGYSEwrngYja4l1qzY6KbwxZiKN3tFUrZ8yN8wDNAkSb9Z9RD7rU5xMoZgnLMC4dHmyoTZo6pk8F9rl465G5a5oaGO9mC6tB%2FZKHDjaErwuan2%2B%2FVkH3SW%2B01yL5YeAX%2FqzilYSQHm8IIZBmZJNt62cqzDwLLdpunPj2LUg8rgsr5PQWi6SDKZtOsr5wLnoA%2FXNzDDHpWZnD43Nqy7uSyXUTaS4qfkhGIu%2FkY8c4sPISjPc0Zlg%3D%3D%7Ctkp%3ABk9SR8jSqPfuYg
-
https://www.ebay.com/itm/304651887245?epid=1511214444&hash=item46eeaae28d:g:oOgAAOSwxuBjPdBI&amdata=enc%3AAQAIAAAAwJ6ch2KCAMdu66bHGYSEwrngYja4l1qzY6KbwxZiKN3tFUrZ8yN8wDNAkSb9Z9RD7rU5xMoZgnLMC4dHmyoTZo6pk8F9rl465G5a5oaGO9mC6tB%2FZKHDjaErwuan2%2B%2FVkH3SW%2B01yL5YeAX%2FqzilYSQHm8IIZBmZJNt62cqzDwLLdpunPj2LUg8rgsr5PQWi6SDKZtOsr5wLnoA%2FXNzDDHpWZnD43Nqy7uSyXUTaS4qfkhGIu%2FkY8c4sPISjPc0Zlg%3D%3D%7Ctkp%3ABk9SR8jSqPfuYg
Great thanks
-
part number C2OZ-8597-D
you might found some on eBay.
Laurent
Great thanks