ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1966 Mustang => Topic started by: Bob Gaines on February 10, 2025, 12:11:16 AM

Title: Emergency flasher wiring harness help
Post by: Bob Gaines on February 10, 2025, 12:11:16 AM
I need some help because I have restoration block. I can't remember where 4 wires on the separate emergency flasher harness go. In the attached pictures they are the orange w yellow tracer bullet connector that has the blue wire with 90 degree end on it and the blue wire and the thinner orange with yellow tracer wire that both have the female connectors. I have had no luck finding them in the schematic. Randy/Midlife or anyone come to my rescue please.
Title: Re: Emergency flasher wiring harness help
Post by: midlife on February 10, 2025, 11:00:26 AM
The two female bullet wires on the left of your picture are not used; the 90* spade connectors are for the e-flasher can; the 90* female bullet and male bullet pigtail is the pick-up of power from the cigarette lighter plug.
Title: Re: Emergency flasher wiring harness help
Post by: Bob Gaines on February 10, 2025, 11:38:44 AM
The two female bullet wires on the left of your picture are not used; the 90* spade connectors are for the e-flasher can; the 90* female bullet and male bullet pigtail is the pick-up of power from the cigarette lighter plug.
Thanks.