ConcoursMustang Forums

1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1970 Mustang => Topic started by: DaveF on May 14, 2025, 01:52:42 AM

Title: Location and position of rear brake line bracket 9" Dual Exhaust Mustang
Post by: DaveF on May 14, 2025, 01:52:42 AM

I was wondering if anyone would post a picture of the ?L? bracket that supports the union of the rear brake hard line and the rear brake hose? I would also appreciate a picture of where the vent hose goes into the underside of the floor. If possible, please take the picture far enough away that I can see its relationship with surrounding parts. Thanks!

Title: Re: Location and position of rear brake line bracket 9" Dual Exhaust Mustang
Post by: Bossbill on May 15, 2025, 07:18:44 PM

Staggered shocks too?

Title: Re: Location and position of rear brake line bracket 9" Dual Exhaust Mustang
Post by: J_Speegle on May 15, 2025, 08:07:23 PM

From dual exhaust staggered shock applications from 1970 Dearborn. Likely have more but these were fairly handy.

If this is not what you needed let us know

Floor bracket

(https://www.concoursmustang.com/forum/gallery/21/6-150525190420-210341363.jpeg)


Rearend to bracket hose

(https://www.concoursmustang.com/forum/gallery/21/6-150525190421-210352459.jpeg)


Brake flex hose retainers

(https://www.concoursmustang.com/forum/gallery/21/6-150525190424-21037412.jpeg)


Rearend vent to unibody hole

(https://www.concoursmustang.com/forum/gallery/21/6-150525190424-210361704.jpeg)

Title: Re: Location and position of rear brake line bracket 9" Dual Exhaust Mustang
Post by: DaveF on May 17, 2025, 12:36:04 AM

Thank you Bill. Yes, it does have staggered shocks. If I find that I need a couple more pictures, I will reach out. Thanks!