ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1967 Mustang => Topic started by: scodemike on June 20, 2011, 02:19:19 PM
-
Does anyone have a picture or can describe to me the location of the Buck tag on a 67 Mustang, Fastback, Metuchen Built April '67? I thought it was on the radiator support, front side on the passenger side, but mine does not have a screw hole in that area.
I know the '69's were on the top of the fender apron near the hood spring, passenger side.
-
My MAR 66 Metuchen car = Driver's side, in front of the hood hinge.
-
67-68 Metuchen buck tags are usually on the top of the rear passenger side inner fender. Some Dearborn might have them on the rad. support.
-
Thanks guys that helped. I just checked mine again and as previously stated there is no hole in the radiator support, none on the top of the apron by the hinge, but there is one on top of the apron, on the driver's side, opposite the hinge. That is the one place I had not looked.
-
Have about a dozen on the drivers side inner fender back by the hood hinge as shown in these two
(http://i44.photobucket.com/albums/f49/firetrainer/67-8%20Mustang%20Pics/7T02C237795bucktag.jpg)
(http://i44.photobucket.com/albums/f49/firetrainer/67-8%20Mustang%20Pics/7T03A158789Buck.jpg)
-
Thanks Jeff, that just confirms Byran's observation. Since that is the location of the hole on mine, that is where it's going. Can you tell it has been awhile since I have done a '67. :-[
-
Guess I had '68's on my mind! :o