ConcoursMustang Forums

Restoring - General discussions that span across many different groups of years and models => Interior & Trunk => Topic started by: Scott Fuller on May 13, 2012, 10:58:58 PM

Title: Trunk Divider Board Plcement
Post by: Scott Fuller on May 13, 2012, 10:58:58 PM

I have a 68 Dearborn built Mustang convertible (4-speed).  I am trying to determine the placement of the trunk divider board, specifically where the board is screwed down (see photo).  I have sees some that are right on the edge of the drop-off, and some a considerable distance back (like the photo).

Does anyone have photos of their board in its original location that they could share (Dearborn cars please).

Thanks,

Scott

Title: Re: Trunk Divider Board Plcement
Post by: J_Speegle on May 14, 2012, 02:19:40 AM

Not sure if any of these will help but there you are

Can't swear that any are untouched but don't think any were restored. Unfortunately lighting is poor and things are in the way as usual. Save then, blow them up and maybe there is a clue or two there.


The last one is of unknown origin though I had it in the 68 Dearborn file area


(http://i44.photobucket.com/albums/f49/firetrainer/68%20Mustang/8F03T207404trnkboard.jpg)



(http://i44.photobucket.com/albums/f49/firetrainer/68%20Mustang/8F03J203275trnkboard.jpg)



(http://i44.photobucket.com/albums/f49/firetrainer/68%20Mustang/8F03C127215board.jpg)



(http://i44.photobucket.com/albums/f49/firetrainer/68%20Mustang/trunkfillerboard.jpg)

Title: Re: Trunk Divider Board Plcement
Post by: Scott Fuller on May 17, 2012, 03:35:52 PM

The bottom photo is the trunk of my 68 San Jose GT convertible.

Scott