ConcoursMustang Forums
1st Generation 1964 1/2 - 1973 - Questions & general discussions that apply to a specific year => 1969 Mustang => Topic started by: G Wood on January 24, 2013, 02:28:43 PM
-
Can anyone share photos of the metal brake line/clamp location running across the firewall and then the driver and passenger side line/clamp location (in fenderwell area) along the frame rail.
Thanks in advance.
-
I only have this poor quality low resolution picture of the partial firewall area. Hope it helps a little and maybe someone else can provide the rest of what you need.
-
(http://i44.photobucket.com/albums/f49/firetrainer/69-70%20Mustang%20Pics/69%20Dearborn/9F03F148570firewall_zpscbef5633.jpg)
(http://i44.photobucket.com/albums/f49/firetrainer/69-70%20Mustang%20Pics/69%20Dearborn/69dearbbrake_zps0106b91c.jpg)
-
Perfect, thanks gentlemen.
-
One more favor, does anyone have a picture of the rear brake line and it's mounting position on the firewall (after it comes up from the trans tunnel). My reference book is not clear if the line is mounted to the firewall in this area or not. I need clarification if there is a mounting clip for the line between the distribution block and the first mount position in the trans tunnel.
Thanks again.
-
Hopes this helps
(http://i44.photobucket.com/albums/f49/firetrainer/69-70%20Mustang%20Pics/9R01H113168-brakerearclips_zpsac8edaf9.jpg)
-
(http://www.andrewsmach1.com/myphotos/ccmustang/firewall/fwallrearbrakeline1.jpg)
(http://www.andrewsmach1.com/myphotos/ccmustang/firewall/fwallrearbrakeline2.jpg)
-
Thanks for the quick responses, these are what I needed.